AM Series Monitors
BM Series Monitors
DM Series Monitors
XM Series Monitors
The XM310K is a 31" true 4K resolution HDR and SDR reference master monitor equipped with professional 12Gbps SDI inputs. The XM310K qualifies as a Dolby Vision mastering monitor. A peak luminance of 3000cd/m2, support for both PQ and HLG EOTFs, multiple color gamut selections, and a contrast ratio in excess of 1,000,000:1 make the XM310K ideal for a wide variety of demanding HDR workflows.
Many professional HDR displays have a peak luminance of just 1000nits. With a peak luminance of 3000nits, the XM310K is three times brighter making it one of the brightest commercially available professional HDR monitors.
The XM310K achieves this with a full array local dimming backlight with over 2,000 individually controlled LED elements to minimize the halation, flare, and other artifacts found on lower density zoned backlight systems.
12Gbps SDI connections greatly simplify room design by allowing you to feed 4K and UHD signals to the display over a single cable. Quad 1.5Gbps and 3Gbps SDI connectivity are also supported in both 2SI and Square Division based variations ensuring compatibility with practically any type of 4K or UHD output. The XM310K supports advanced 12bit 4:4:4 YCbCr, RGB, and XYZ signals setting it apart from less advanced monitoring solutions.
The XM310K features the unique ability to simultaneously supply a clean 12G / 6G loop through and real-time down converted 3G or 1.5G output. Any incoming single link 4K or UHD signals can be converted to 2K or HD outputs for downstream HD monitors or scopes, all without needing any standalone down conversion equipment.
The IP Remote Utility can be used to remotely toggle functions, switch inputs, and navigate the menu on Flanders Scientific monitors using your Mac or PC's keyboard, mouse or control panel. Also available for iOS devices.
A Stream Deck can be easily configured for use with the IP Remote Utility to trigger shortcuts.
Download the IPRU Sample Profiles and Quick Start Guide .PDF.
The XM310K is a true 4K resolution monitor (4096x2160) that supports full screen viewing of HD, Ultra HD, and 4K content.
XM series monitors automatically read payload ID (VPID) information embedded in SDI signals and lock to the signal accordingly. This information can also be temporarily displayed whenever a format change is detected so that you can be sure that what you intend to output to the monitor is what the monitor receives.
A VPID override toggle is also provided allowing users to manually configure the monitor in instances where the payload ID may be missing or incorrect.
View interlaced video with correct field order or combine fields and display interlaced signals as progressive.
HD content is displayed without interpolation by representing every pixel from the incoming source as 4 pixels on the panel. This allows for accurate signal representation on screen by avoiding interpolation methods that might mask or omit image issues.
The XM310K features direct compatibility with on-set color applications like LiveGrade Pro, Prelight, FireDay, and FirePlay for real-time color manipulation without the need for a standalone 4K LUT box.
The XM310K is ideal for multi-cam monitoring applications with support for simultaneous viewing of up to 4 genlocked HD feeds and the additional ability to view any feed full screen as needed.
The XM310K comes equipped with 4K compatible real-time waveform and vector scope.
4 adjustment points from 0-100 percent allow you to establish specific target areas to be shown in false color or greyscale.
Choose from a wide assortment of standard markers and safety areas that can be displayed as lines, translucent overlays, or solid overlays. Lines and overlays have selectable colors for instant customization.
1.85:1
2.4:1
2.35:1
2.39:1
2:1
3.125:1
4:3
4x3 CC
6.25:1
13:9
14:9
14:9 CS
15:9
16:9
16:9 in 4:3
17:9
32:9
ADOBE
DISCOVERY V2
DISCOVERY V3
DISCOVERY
4x3 DPP
16x9 DPP
HISTORY
LIFETIME
NATGEO
OUTDOOR
SYMMETRY GRID
TRAVEL
TWC 2013
TWC 2014
TWC 2015
TWC SAFETY
VFRAME L
VFRAME R
WEATHER
WS
XM Series monitors have the unique ability to process 3D LUTs using your choice of trilinear or tetrahedral interpolation. Trilinear LUT interpolation is very common and having this option allows you to process LUTs as they will frequently be seen elsewhere. More advanced tetrahedral LUT interpolation, while not as ubiquitous, allows for a higher degree of precision with better on screen performance.
Trilinear
Tetrahedral
The XM310K is power efficient, consuming 80W in SDR mode and only 200W max in HDR mode. The XM310K requires just a single power cable and can be plugged into any standard 110~240V AC outlet.
The XM310K is engineered to meet critical post production benchmarks for HDR mastering, but has also been designed with production applications in mind with physical characteristics like recessed SDI inputs, 100mm VESA mounting, a durable all metal chassis, and mounting points for a protective transport screen cover.
© 2020 Flanders Scientific, Inc.
