Firmware

DM Series

DM160, DM170, DM211, DM220, DM231, DM240, DM241, DM242, DM250

Current release: 2.0.00-2380 Jan 28, 2026

Bug fix: Resolves an issue that could cause excessively slow monitor boot times (up to ~40 seconds) when the monitor's LAN port is connected directly to a host computer.

Bug fix: resolves flashing screen bug on DM242 monitor shutdown.

DM Series Beta

DM160, DM170, DM211, DM220, DM231, DM240, DM241, DM242, DM250

Current release: 2.0.00-2384 Aug 31, 2026

Adds GaiaColor Analyzer to DM Series.

XMP Series

XMP270, XMP310, XMP550, XMP650, XMP551, XMP651

Current release: 3.2.12 Aug 31, 2026

Expanded profile capabilities. Profiles can now save and recall more preferences including function button assignments, DIT LUT memory selections, and Quad Mode activation state.

XMP C Series

XMP270C, XMP310C, XMP550C

Current release: 3.2.12 Aug 31, 2026

Expanded profile capabilities. Profiles can now save and recall more preferences including function button assignments, DIT LUT memory selections, and Quad Mode activation state.

BoxIO

Current release: 1.70 Jan 4, 2022

Adds stand alone time code capture capability for integration partners.
Resolves bug from 1.68 and 1.69 that could cause connectivity issues with older BoxIO devices.

AM Series

AM210

BM Series

BM090, BM210, BM211, BM240

CM Series

CM171, CM240, CM250

Current release: 1.1.04-2249 Jun 14, 2018

Adds Sundance Marker.

XM Series

XM310K, XM311K, XM551U, XM552U, XM650U, XM651U, XM652U

Current release: 2.1.25 Oct 4, 2022

Updates to 1.5G and 3G signal support. When Video Menu-> SDI Format -> AUTO is selected payload ID of the signal will be detected and followed. If Payload ID is missing from the output device the monitor will process the incoming signal as 4:2:2 YCbCr when set to AUTO, but this update allows the SDI Format Selection override (Video Menu-> SDI Format -> manual selection) to also work on 1.5G and 3G signals, not just 6G and 12G signals.

LM Series

CM-170W

Current release: 1.1.04-2249 Jun 14, 2018

Adds Sundance Marker.

Easy To Update

Please read update instructions carefully before attempting an update. If you have any questions about the update process or firmware releases please contact us by email or by phone at +1.678.835.4934.

Updates will not delete calibration or DIT LUTs, but please take note of any custom settings on your monitor as these may be reset during a firmware update.

AM Series Firmware
Update Instructions PDF

BM & CM Series Firmware
Update Instructions PDF

DM Series Firmware
Update Instructions PDF

LM Series & CM170W Firmware
Update Instructions PDF

XM & XMP Series Firmware
Update Instructions PDF

BoxIO Firmware
Update Instructions PDF

XMP Series Update Instructions Video

DM Series Update Instructions Video

AM | BM | CM | LM Series Update Instructions Video

BoxIO Update Instructions Video

Classic Update Method

Does not apply to DM, XM, or XMP Series.

We highly recommend using the Mass Storage Update Process and not the traditional update process listed below. However, the traditional update process is required if one of the following is true:

Your monitor does not already have firmware version 9.16 or later. All monitors with firmware versions before 9.16 must be updated using the traditional update process. This will only be required once. After updating to firmware version 9.16 or later all future updates will be possible via the Mass Storage Update process.
You have loaded the incorrect firmware (for a different monitor model) into your monitor. You will need to restore your monitor one time using the traditional update process.

Certain DLL files are required for the traditional update program to run correctly. These files are typically included in a normal Windows installation. However, if you receive warning messages that required DLL files are missing simply download the ZIP file, extract all the files within the folder, and copy/paste them to the C:/Windows/System32 folder.

Update Utility (32-bit Windows Required)

Windows .DLL Zip

Complete firmware release history, newest first. 268 entries.

Date	Version	For	Notes
Aug 31, 2026	2.0.00-2384	DM Series Beta	Adds GaiaColor Analyzer to DM Series.
Aug 31, 2026	3.2.12	XMP Series XMP C Series	Expanded profile capabilities. Profiles can now save and recall more preferences including function button assignments, DIT LUT memory selections, and Quad Mode activation state.
Jul 20, 2026	3.2.11	XMP Series XMP C Series	FW 3.2.11 Release Notes GPI Contact Closure Support: adds a GPI menu to the monitor, allowing you to assign toggles to GPI port pins 1 through 7 for simple contact-closure control of various features including power on/off, input selection, and tally lights. Note: GPI contact-closure functionality requires both firmware version 3.2.11 or later and MCU version 21 or later. Updating the MCU is a separate process from installing standard firmware updates and requires a special cable and update utility. Contact Flanders Scientific Support if you require an MCU update. If your monitor has an earlier MCU version installed and you do not require GPI contact-closure functionality, there is no need to update the MCU. Updated Clear Panel Noise Prompt Behavior: If no selection is made when prompted to run Clear Panel Noise (CPN) during monitor shutdown, the monitor will automatically select Yes and begin the CPN process 5 minutes after the prompt is first displayed.
May 28, 2026	3.2.10	XMP Series XMP C Series	Adds support for export of more print-friendly GaiaColor Analyzer reports with white background. Dark background export remains an option as well. Updates to remote Look LUT sending/persistence behavior in anticipation of future 3rd party integrations.
Apr 27, 2026	3.2.08	XMP Series XMP C Series	Adds GaiaColor Analyzer, a built-in calibration reporting capability that verifies the results of GaiaColor AutoCal calibrations. Like GaiaColor AutoCal, no standalone computer or software is required — simply connect a compatible probe directly to the monitor. GaiaColor Analyzer automatically performs a calibration QC check against your active color space and generates an on-screen calibration report. Both the current report and the previous report are accessible at any time from the monitor’s menu. For those who want to export the report as a PDF, this is now supported via the latest IP Remote Utility application. GaiaColor Analyzer is useful both for verifying the accuracy of a recent AutoCal calibration and as a long-term tool for determining when recalibration may be needed. AutoCal Warm-up prompt updated for greater clarity.
Mar 3, 2026	3.2.05	XMP Series XMP C Series	Resolves bug that would force monitor into Interfield Deinterlace Mode on monitor power cycle, regardless of what the menu setting was actually set to. Monitor will now correctly boot into the mode set on the monitor menu. Changes Deinterlace Mode default to Intrafield. Whenever selecting Load Profile -> Default the monitor will now set Deinterlace Mode to Intrafield.
Feb 2, 2026	3.2.04	XMP Series XMP C Series	Vastly enhanced granularity for manual RGB gain controls. Scale now operates from -150 to +150, compared to the previous -50 to +50 range and now allows for much smaller steps between adjustments. More custom luminance selections added, specifically 48nits has been added as a selectable target as well as more granular 1nit selections between 80 and 120nits. The rest of the range remains selectable in 20nit increments as before. Added 8K UHD and 8K DCI* signal support Added UHD and 4K DCI* p50/60 support at 4:4:4 *8K DCI and 4K DCI are currently only supported via 2SI whereas 8K UHD and UHD are supported via both SQD and 2SI. Bug fix: User cLUT selection is now saved / recalled as part of Profile Save / Profile Load operation.
Jan 28, 2026	2.0.00-2380	DM Series	Bug fix: Resolves an issue that could cause excessively slow monitor boot times (up to ~40 seconds) when the monitor's LAN port is connected directly to a host computer. Bug fix: resolves flashing screen bug on DM242 monitor shutdown. Fixes flashing screen bug on monitor shutdown for DM242.
Jan 13, 2026	2.0.00-2380	DM242	Fixes flashing screen bug on monitor shutdown for DM242.
Dec 18, 2025	3.2.00	XMP Series XMP C Series	Adds warning prompt when using AutoCal Backup Load with notification that this will replace the AutoCal dataset currently active. Adds additional AutoCal Backup selection named LAST. This selection automatically stores and recalls the data from the most recent AutoCal performed on the monitor. Bug Fix: resolves issue where scope trace data and scope graticules would be drawn on separate portions of the screen if activated while in quad mode. Bug Fix: fixes waveform scope graticules when using percentage mode while in extended (64-1019) range on the monitor.
Dec 11, 2025	3.1.15.7	XMP Series XMP C Series	Improves scope rendering on screen, scopes are now no longer too bright or too dim in HDR operation. Unified build for XMP and XMP C series monitors 3G_INx4 renamed Quad Mode. Adds support for 6G and 12G signals in Quad Mode. Adds support for empty inputs in Quad Mode. Any empty input will simply be shown as a black quadrant on screen while in Quad Mode allowing you to monitor 2, 3, or 4 signals at the same time. Color management menus updated into two separate menus, Color-Global and Color-Input. Color-Input menu now allows for independent color space configuration per input, including for simultaneous use in quad mode. Directly assign unique Gamut, EOTF, White Point, Range, and Luminance settings per input. A Global Color Input mode is also still provided allowing for universal application of color management settings across all inputs. Update to interactive behavior between Input Color Mode and Input Color Config for a more user-friendly experience. When selecting Input Color Mode Global the Input Color Config menu will automatically switchover to Global as well and, to prevent any confusion, will lockout access to Individual Input Color Configs. When switching to Input Color Mode -> Individual Input the Individual Input Color Configs will become accessible and access to the Global Input Color Config will be blocked to help prevent any confusion. Updated DIT LUT functionality (Global Color Input Mode only) allowing up to 16 DIT Look LUTs to be saved to the monitor's non-volatile memory. Once saved to the monitor any saved DIT Look LUT can be applied to any input directly from the monitor's Color Input menu. Added Gamut Toggle menu item with options for Hue Preservation or Max Saturation. Allows you to define gamut mapping behavior when the monitor is set to a color space selection larger than the display can achieve (e.g. Rec2020). See user manual for details. Performance Optimization: improvements to automatic signal locking on unclean switches and/or format changes upstream of monitor. This should reduce or eliminate the need to re-press an input button to force signal re-lock when dealing with variable or unstable signals upstream of the display. Scopes, Menus, and OSD Status Windows have been updated to always operate at a consistent (SDR range) luminance level regardless of monitor operating mode. This helps render scopes and menus on screen at a comfortable brightness level even when using the monitor in HDR mode. Menu brightness may still be further adjusted/customized from the OSD menu. Adds ability for profiles to save and recall preferred custom marker settings. Bug Fix: Intermittent too bright on initial boot bug should be resolved in this build. Bug Fix: Resolves bug inadvertently introduced in the first public beta that could lead to intermittent No Signal indications during AutoCal that could interrupt the process and lead to corrupt calibration data. Bug Fix: fixes bug from early betas that prevented scopes from working in the correct range while in Input Color Mode Global. Bug Fix: resolves bug from earlier betas that prevented LUM Coloring / Red Only / Green Only / Blue Only modes from being activated properly while in Color-Input->Global mode.
Nov 18, 2025	3.1.14.8 Beta	XMP Series	New for Public Beta 8: Resolves bug from earlier betas that prevented LUM Coloring / Red Only / Green Only / Blue Only modes from being activated properly while in Color-Input->Global mode. Adds ability for profiles to save and recall preferred custom marker settings Includes the following updates from 3.1.14 beta versions 1 through 7: Menu and OSD Status Windows have been updated to always operate at a consistent (SDR range) luminance level regardless of monitor operating mode. This helps render menus on screen at a comfortable brightness level even when using the monitor in HDR mode. Menu brightness may still be further adjusted/customized from the OSD menu. Update to interactive behavior between Input Color Mode and Input Color Config for a more user friendly experience. When selecting Input Color Mode Global the Input Color Config menu will automatically switchover to Global as well and, to prevent any confusion, will lockout access to Individual Input Color Configs. When switching to Input Color Mode -> Individual Input the Individual Input Color Configs will become accessible and access to the Global Input Color Config will be blocked to help prevent any confusion. Resolves bug from previous betas that prevented scopes from working in the correct range while in Input Color Mode Global. Gamut Toggle -> Hue renamed Gamut Toggle -> Hue Preservation 3G_INx4 renamed Quad Mode. Adds support for 6G and 12G signals in Quad Mode. Adds support for empty inputs in Quad Mode. Any empty input will simply be shown as a black quadrant on screen while in Quad Mode allowing you to monitor 2, 3, or 4 signals at the same time. Color management menus updated into two separate menus, Color-Global and Color-Input. Color-Input menu now allows for independent color space configuration per input, including for simultaneous use in quad mode. Directly assign unique Gamut, EOTF, White Point, Range, and Luminance settings per input. A Global Color Input mode is also still provided allowing for universal application of color management settings across all inputs. Updated DIT LUT functionality (Global Color Input Mode only) allowing up to 16 DIT Look LUTs to be saved to the monitor's non-volatile memory. Once saved to the monitor any saved DIT Look LUT can be applied to any input directly from the monitor's Color Input menu. Adds and activates the Gamut Toggle menu item. This was not yet working in the first public beta, but is working now. Allows you to define gamut mapping behavior when the monitor is set to a color space selection larger than the display can achieve (e.g. Rec2020). See user manual for details. Performance Optimization: improvements to automatic signal locking on unclean switches and/or format changes upstream of monitor. This should reduce or eliminate the need to re-press an input button to force signal re-lock when dealing with variable or unstable signals upstream of the display. Bug Fix: Intermittent too bright on initial boot bug should be resolved in this build. Bug Fix: Resolves bug inadvertently introduced in the first public beta that could lead to intermittent No Signal indications during AutoCal that could interrupt the process and lead to corrupt calibration data.
Oct 17, 2025	3.1.14.2 Beta	XMP Series	3G_INx4 renamed Quad Mode. Adds support for 6G and 12G signals in Quad Mode. Adds support for empty inputs in Quad Mode. Any empty input will simply be shown as a black quadrant on screen while in Quad Mode allowing you to monitor 2, 3, or 4 signals at the same time. Color management menus updated into two separate menus, Color-Global and Color-Input. Color-Input menu now allows for independent color space configuration per input, including for simultaneous use in quad mode. Directly assign unique Gamut, EOTF, White Point, Range, and Luminance settings per input. A Global Color Input mode is also still provided allowing for universal application of color management settings across all inputs. Updated DIT LUT functionality (Global Color Input Mode only) allowing up to 16 DIT Look LUTs to be saved to the monitor’s non-volatile memory. Once saved to the monitor any saved DIT Look LUT can be applied to any input directly from the monitor’s Color Input menu. Adds and activates the Gamut Toggle menu item. This was not yet working in the first public beta, but is working now. Allows you to define gamut mapping behavior when the monitor is set to a color space selection larger than the display can achieve (e.g. Rec2020). See user manual for details. Performance Optimization: improvements to automatic signal locking on unclean switches and/or format changes upstream of monitor. This should reduce or eliminate the need to re-press an input button to force signal re-lock when dealing with variable or unstable signals upstream of the display. Bug Fix: Intermittent too bright on initial boot bug should be resolved in this build. Bug Fix: Resolves bug inadvertently introduced in the first public beta that could lead to intermittent No Signal indications during AutoCal that could interrupt the process and lead to corrupt calibration data.
Oct 6, 2025	3.1.14 Beta	XMP Series	3G_INx4 renamed Quad Mode. Adds support for 6G and 12G signals in Quad Mode. Adds support for empty inputs in Quad Mode. Any empty input will simply be shown as a black quadrant on screen while in Quad Mode allowing you to monitor 2, 3, or 4 signals at the same time. Color management menus updated into two separate menus, Color-Global and Color-Input. Color-Input menu now allows for independent color space configuration per input, including for simultaneous use in quad mode. Directly assign unique Gamut, EOTF, White Point, Range, and Luminance settings per input. A Global Color Input mode is also still provided allowing for universal application of color management settings across all inputs. Updated DIT LUT functionality (Global Color Input Mode only) allowing up to 16 DIT Look LUTs to be saved to the monitor's non-volatile memory. Once saved to the monitor any saved DIT Look LUT can be applied to any input directly from the monitor's Color Input menu. Added Gamut Toggle menu item. Please note, this is only a placeholder for now and is not active yet. This feature will be added in a future build. Performance Optimization: improvements to automatic signal locking on unclean switches and/or format changes upstream of monitor. This should reduce or eliminate the need to re-press an input button to force signal re-lock when dealing with variable or unstable signals upstream of the display. Bug Fix: Intermittent too bright on initial boot bug should be resolved in this build.
May 30, 2025	3.1.10	XMP Series	Initial firmware build for XMP270 compatibility. GaiaColor AutoCal process update making calibration 20% to 35% faster depending on specific probe / monitor combination used. Addition of patch/probe dialog information during GaiaColor AutoCal to more positively identify that the process is actively running. GaiaColor AutoCal process and algorithm updates further enhancing overall color accuracy, most notably providing industry-leading lowlight saturation preservation for QD-OLED displays. Requires recalibration after update to take advantage of these improvements. Improvements to signal locking on unclean switches / format changes upstream of monitor.
Mar 24, 2025	3.1.07	XMP Series	Major Update to Quad View (4 x HD signals) operation, external gen-lock synchronization is no longer required between signals. Signals should still be the same frame rate and format for quad view operation, but the need to synchronize signals through a clean switch router and/or to gen-lock camera sources is no longer required thanks to the activation of an internal PLL generator for synchronization. Update to MON output capability: Each of the monitor’s 4 dedicated processed monitor outputs will now also apply any active Look LUTs for the corresponding input in real-time allowing XMP series monitors to serve as a 4 channel LUT box not only for the onscreen image, but also for any connected downstream devices. Update to real-time LUT update support: now works for all supported signal formats including 4K / UHD sources. This enables direct connection between applications like Pomfort’s Livegrade and any XMP series monitors for realtime look LUT control on the monitor. Real-time Look LUT support between LiveGrade and XMP series is currently limited to SDI 1 input Scope Update: integrated scopes now work with Full Range 444 RGB signals in addition to all previously supported formats. Addition of Monochrome, Blue Only, Red Only, and Green Only Viewing Modes. Blue Only, Red Only, and Green Only modes can be viewed as standard or as Mono (e.g. Blue as Mono). These new selections can be found on the Video Menu (Video -> Color Mode) or assigned to a function button. Updates to quarter-sample HD Monitor Output functionality. Simplified operation with a single HD Downscale On/Off menu toggle instead of multiple input/output options. When turned ON 12G will be output as 3G, and 6G as 1.5G, on the MON Outputs. When turned off the MON Outputs will not down-convert, but rather passthrough the original signal format. This UHD->HD downscale functionality has also been improved for more robust operation, solving many previous nuisance bugs that would require certain signal connection / menu selection / boot order requirements in order to get a functioning HD down-converted output. Lastly, the MON outputs now work as a dedicated MON Output per input. Audio Bug Fix: Audio de-embedding now de-embeds both channel 1 and channel 2 as stereo audio to your choice of built-in speakers or 3.5mm audio mini-jack output. Resolves Look LUT saving bug that would sometimes prevent Look LUTs from being retained in memory. The monitor must still be power cycled after saving Look LUTs before they can be recalled from non-volatile memory. Improvements to signal locking when switching formats. Faster and more robust signal locking on format changes.
Mar 10, 2025	3.1.05	XMP Series Public Beta v3	Addition of Dual Link SDI support missing from previous betas. Resolves the monitor menus will freeze if trying to make color menu selections via the IP remote utility bug from the previous beta.
Feb 24, 2025	3.1.04	XMP Series Public Beta v2	Adds Mono, Blue as Mono, Red Only, Red as Mono, Green Only, Green as Mono to list of assignable function button selections. Adds 3rd Party Calibration LUT support, missing from initial beta, back into the build. Resolves bug from previous beta that could cause the monitor to partially freeze when making many different selections in rapid succession via monitor keypad. Resolves intermittent bug from previous beta that could cause a distorted image to appear on screen in a very small percentage of cases when making a new Color Menu selection. Resolves intermittent bug from previous beta that could prevent DIT Look LUTs from saving correctly to the monitor’s memory.
Jan 27, 2025	3.1.02	XMP Series Public Beta	Major Update to Quad View operation, external gen-lock synchronization is no longer required between signals. Signals should still be the same frame rate and format for quad view operation, but the need to synchronize signals through a clean switch router and/or to gen-lock camera sources is no longer required thanks to the activation of an internal PLL generator for synchronization. Update to MON output capability: Each of the monitor’s 4 dedicated processed monitor outputs will now also apply any active Look LUTs for the corresponding input in real-time allowing XMP series monitors to serve as a 4 channel LUT box not only for the onscreen image, but also for any connected downstream devices. Update to real-time LUT update support: now works for all supported signal formats including 4K / UHD sources. This enables direct connection between applications like Pomfort’s Livegrade and any XMP series monitors for realtime look LUT control on the monitor. Real-time Look LUT support between LiveGrade and XMP series is currently limited to SDI 1 input Scope Update: integrated scopes now work with Full Range 444 RGB signals in addition to all previously supported formats. Addition of Monochrome, Blue Only, Red Only, and Green Only Viewing Modes. Blue Only, Red Only, and Green Only modes can be viewed as standard or as Mono (e.g. Blue as Mono). These new selections can be found on the Video Menu (Video -> Color Mode). Updates to quarter-sample HD Monitor Output functionality. Simplified operation with a single HD Downscale On/Off menu toggle instead of multiple input/output options. When turned ON 12G will be output as 3G, and 6G as 1.5G, on the MON Outputs. When turned off the MON Outputs will not down-convert, but rather passthrough the original signal format. This UHD->HD downscale functionality has also been improved for more robust operation, solving many previous nuisance bugs that would require certain signal connection / menu selection / boot order requirements in order to get a functioning HD down-converted output. Lastly, the MON outputs now work as a dedicated MON Output per input. Audio Bug Fix: Audio de-embedding now de-embeds both channel 1 and channel 2 as stereo audio to your choice of built-in speakers or 3.5mm audio mini-jack output.
Nov 29, 2024	2.0.00-2379	DM Series	Update to Fast Mode operation when no signal is present: with fast mode function turned on, if no signal is present, the monitor will now automatically disable fast mode to provide you with access to menus. Provided the Fast Mode function remains activated Fast mode will automatically reenable when a signal is present again. This update also fixes a bug from the previous build where booting the monitor with no signal present while fast mode was still active from last session would cause a no menu/no image condition even when the signal was reconnected.
Nov 13, 2024	2.4.68	XMP Series	Big improvements to interlaced video monitoring capabilities for all XMP models providing high quality, reference grade monitoring of interlaced video signals. There are now 3 deinterlace toggles to choose from: Interfield: fields are combined and shown as progressive. Intrafield: fields are shown as interlaced on screen with proper temporal field order. This is the mode suggested for QC monitoring of interlaced sources as it will allow you to spot issues like field reversals. Psf: for use with progressive segmented frame (PsF) signals. PsF signals are sent to the monitor similarly to interlaced video sources, setting this selection to PsF allows the monitor to display such PsF sources as progressive on screen. Improvements to HLG operation, especially for XMP310. Changes take effect after updating and running new AutoCal. If you do not have time to run a new AutoCal you can still benefit from these improvements by selecting AutoCal Data Backup -> Data 1, then AutoCal Data Load -> Data 1, but a new AutoCal run will maximize the improvements implemented in this build.
Nov 8, 2024	2.4.66	XMP Series	Resolves protocol conflict with DM series.
Oct 29, 2024	2.4.65	XMP Series	New Scaling Engine: change to high-quality, ultra-low-latency, bicubic scaling engine for greatly improved HD video monitoring. Updated LUM selection on XMP310 to no longer allow for 1800 preset to be selected as monitor is limited to 1000nits.
Oct 21, 2024	2.4.62	XMP Series	Adds support for custom marker deletion.
Sep 30, 2024	2.4.60	XMP Series	Restores Look LUT support that was unavailable in Public Beta 2.4.59. Adds Custom Marker Upload support. Upload any custom 1920x1080 resolution PNG to the monitor. Requires IPRU version 1.9.6 or later, see user manual for details. Adds support for Minolta CA527 to GaiaColor AutoCal. DP In Port activated for secondary use as a computer monitor. This input only supports 3840x2160@60P. Various bug fixes.
Sep 19, 2024	2.4.59	XMP Series	Official shipping release is still firmware 2.4.50 Adds Custom Marker Upload support. Upload any custom 1920x1080 resolution PNG to the monitor. Requires IPRU version 1.9.6 or later, see user manual for details. Adds support for Minolta CA527 to GaiaColor AutoCal. DP In Port activated for secondary use as a computer monitor. This input only supports 3840x2160@60P. Various bug fixes. NOTE: This firmware build does not support Look LUT upload or connection to LiveGrade. For operators utilizing the Look LUT feature or direct LiveGrade connection to XMP series monitors please continue to use firmware 2.4.50 for now, which will work with LiveGrade provided your source is HD. This functionality will be restored in build 2.4.60 and later.
Jul 15, 2024	2.0.00-2374	DM Series	Adds 1.5x, 1.66x, and 1.8x anamorphic desqueeze modes. Add Anamorphic Factor toggle to Video menu with options for 1.3x, 1.5x, 1.66x, 1.8x, and 2.0x. Updates Anamorphic Desqueeze operation with toggles for Off, Standard, and Magnified, accessible both from the Video Menu or by assigning anamorphic desqueeze to a function button. The magnified desqueeze mode will apply the selected anamorphic factor and zoom in on the image until the monitor’s 16:9 raster is filled.
Jun 28, 2024	2.4.50	XMP Series	This is a reissued version of firmware 2.4.49 with the beta 4x Look / DIT LUT support, introduced in fw 2.4.45, but absent from firmware 2.4.47 and 2.4.49, added back in.
Jun 27, 2024	2.4.49	XMP Series	Resolves YCbCr -> RGB matrix coefficient bug that would only occur if monitoring 422 YCbCr signals with monitor gamut set to 2020 and also toggling inputs. The correct matrix coefficient for 422 signals, based on the monitor’s selected gamut, is now retained even when inputs are toggled. Improves performance of Video Range (64-940) gamma EOTF tracking. Improvements are automatically applied if running a new AutoCal. If not running a new AutoCal after update please manually refresh calibration LUT generation from the monitor’s Color Menu by selecting AutoCal Data Backup -> 1, AutoCal Backup Load -> 1.
Jun 20, 2024	2.4.47	XMP Series	Improvement to GaiaColor AutoCal LUT generation algorithms for better saturation preservation in extreme lowlights leading to even lower dE values, especially at mesopic luminance levels. Note: new LUT generation algorithm automatically applied with next AutoCal run or can be manually initiated without requiring recalibration from monitor’s Color menu by selecting AutoCal Data Backup -> 1, then selecting AutoCal Backup Load -> 1. Once selected LUTs will be refreshed using updated algorithm based on last AutoCal profiling data set. Resolves panel self test sequence bug on XMP650 inadvertently introduced in fw build 2.4.45. Changes the default Luminance Custom Value from 160 to 100. This has no impact on luminance unless Luminance Mode is set to Custom.
Jun 5, 2024	2.4.45	XMP Series	Adds 3G/HD_INx4 function for quick single button access to quad view mode. Note, signals must be synchronized, see user manual for details. Adds Smooth Gradient function enabling reduced quantization and improved perceived smoothness of gradients, especially when dealing with high bit depth PQ EOTF signals. Bug fix for XMP310, adds 720P signal support. Beta 4x Look / DIT LUT support - for limited testing, official Look LUT update still to come. Currently limited to HD sources for testing. Update to panel frequency sync behavior for interlaced sources to prevent overflow condition. Note, this disables the Mode1 and Mode2 de-interlace toggle for now, monitor will always process as Mode 1 regardless of toggle setting. An improved interlaced video processing mode is expected at a future date.
Mar 28, 2024	2.4.41	XMP Series	Adds support for Klein K10A and K80 colorimeters to GaiaColor AutoCal.
Mar 18, 2024	2.4.40	XMP Series	Bug fix for audio de-embedding distortion Bug fix for XMP310 distorted image in quadrant 3 of quad 3G / 1.5G display mode. Adds support for i1D3DS OEM, CA210(10mm), CA310(10mm), and CA410 to GaiaColor Direct Connect Volumetric AutoCal.
Mar 4, 2024	2.4.38	XMP310	Adds automatic CPN prompt to XMP310 Adds pixel mapping support for HD, 2K, and 4K signals on XMP310
Feb 6, 2024	2.4.35	XMP Series	Restores functioning HLG EOTF selections that were inadvertently disabled in previous firmware build. 3rd Party LUT Mode simplified: removes Advanced/Normal toggle within 3rd Party LUT Mode. Normal mode is now the standard operating mode. Monitor’s LUM Selection can now be used in 3rd Party LUT Mode. Make sure that where you have LUM selection set before building a LUT is where you leave LUM selection set when using that LUT. General GaiaColor AutoCal calibration improvements/enhancements. Fixes intermittent freeze on boot up behavior.
Dec 8, 2023	2.4.25	XMP550	Adds ability to turn keypad LED lights Off. This new option can be found on the System Menu -> Button LED. Please note that to prevent confusion on power cycle the keypad lights reset to ON whenever the monitor is rebooted.
Nov 28, 2023	2.0.00-2372	DM211 DM231	Sets default I->P mode to Inter-field on DM211 and DM231.
Nov 20, 2023	2.4.17	XMP550	GUI Update: Adds menu brightness adjustment selection to OSD menu allowing onscreen menu to be dimmed according to user’s preference.
Nov 13, 2023	2.4.15	XMP550	DCVA (Direct Connect Volumetric AutoCal) improvements including: Addition of automated warmup routine to DCVA process eliminating need to perform a separate manual warmup before starting calibration. See updated AutoCal guide for details. Improvements to loading behavior. Provides for even greater consistency between L20 and larger test patch sizes (e.g. L32 / L40) even through a 1,000nit threshold. Further improvements to extreme lowlight tracking, building on version 2.4.11’s luminance tracking improvements, with a specific focus on greater chromaticity neutrality. Removes the Delete AutoCal Data menu item as this is not needed. Adds AutoCal Data Backup and AutoCal Backup Load menu items. These are not needed for normal use cases and have been added primarily to facilitate probe integration testing internally at FSI.
Oct 23, 2023	2.4.11	XMP550	Improvements to PQ luminance tracking in lowlights.
	2.4.10	XMP550	UI Update: Adds LUM 1800 Selection. UI Update: LUM Custom Slider Now Expanded to allow selections up to 2000. UI Update: Adds menu selections for baud rate, parity, and address to enable use with RS422/485 remote control interfaces. Adds support for HLG in Video Range at 1800nits peak.
Oct 13, 2023	2.4.09	XMP550	Fixes bugs from previous builds that would offset 3rd party LUT memory loading by one position. 3rd Party LUTs now load to the expected memory slots. Adds correct HLG Extended Range (64-1019) monitoring option.
Oct 9, 2023	2.4.08	XMP550	UI Update: Extended Range (64-1019) SDR selections (any selection using Gamma EOTF) will now use the monitor’s LUM selection as the nominal (code value 940) luminance target, not the peak white luminance target. This enables switching between Video (64-940) and Extended (64-1019) while retaining the same nominal white luminance. Bug Fix: HLG selections now use correct system gamma for any selected peak luminance setting.
	2.4.07	XMP550	Bug Fix: SDI Format configuration now follows Payload ID detection when set to AUTO. If the signal’s Payload ID is present and correct leaving SDI Format set to AUTO should allow the monitor to automatically set SDI Format to match 10 and 12bit YCbCr or RGB signals. If signal is missing Payload ID or Payload ID is incorrect you can still use the manual SDI Format toggle to set SDI Format as needed.
	2.4.06	XMP550	Bug Fix: Panel Refresh. 24P, 48P -> 96Hz 25P, 50P -> 100Hz 30P, 60P -> 120 Hz UI Update: Load Profile -> Default. Has been updated to use 6500K as default CCT. UI Update: AutoCal probe positioning crosshair. Guide position adjusted to exact center of display.
Oct 3, 2023	2.4.05	XMP550	Fixes UI bug that advised naming the CR100 matrix (null) when running AutoCal, now correctly advises that name of CR100 matrix must be XMP550
May 5, 2023	2.0.00-2370	DM Series	Adds recovery / bypass mode for black screen, slow data save, and other unwanted monitor states that can occur if AutoCal is interrupted or done incorrectly (e.g. probe lens covered). All DM series users are advised to update to this build or later to ensure the availability of the recovery mode should it ever be needed. Adds 2.39:1 & 2:1 Combo Custom Marker
Apr 12, 2023	2.0.00-2365	DM Series	Adds 1.78 for Square Custom Marker Fixes intermittent requirement to update DM160 firmware twice, just a single update is now sufficient.
Mar 9, 2023	2.0.00-2363	DM160	Fixes potential small white balance shift on DM160 when monitoring 25 / 50 frame rate signals (fixes for both Fast and Normal Mode)
Mar 7, 2023	2.0.00-2362	DM160	Fixes potential small white balance shift on DM160 when monitoring 25 / 50 frame rate signals.
Feb 27, 2023	2.0.00-2360	DM160	Resolves bug that could cause intermittent image artifacts when monitoring PsF signals.
Dec 5, 2022	2.0.00-2358	DM Series	Adds direct support of Colorimetry Research CR250 and CR300 spectroradiometers to DM series AutoCal. See updated AutoCal guide for details. Resolves bug from FW2.0.00-2356 / 7 that may have made the firmware build incompatible with some DM211 units.
Nov 27, 2022	2.0.00-2356	DM Series	Adds direct support of Colorimetry Research CR250 and CR300 spectroradiometers to DM series AutoCal. See updated AutoCal guide for details.
Nov 15, 2022	2.0.00-2355	DM Series	Greys out / disables the gamma selection on the Color Management Menu when an HDR Preview mode is selected to avoid confusion.
Oct 26, 2022	2.0.00-2352	DM220	Improvements to fast mode performance for 25P frame rates.
Oct 26, 2022	2.0.00-2350	DM Series	Resolves intermittent line on right side of image with 3G Level A 444 RGB signals while Fast Mode is active.
Oct 17, 2022	2.0.00-2351	DM220	Adds unrestricted support for 24P in Fast Mode. Removes FM24 menu option, no longer required. Various other improvements to fast mode performance for 24P and 30P frame rates.
Oct 17, 2022	2.0.00-2349	DM Series	Restores 1D DIT (Look) LUT capability that was inadvertently made inaccessible in a previous build.
Oct 4, 2022	2.1.25	XM Series	Updates to 1.5G and 3G signal support. When Video Menu-> SDI Format -> AUTO is selected payload ID of the signal will be detected and followed. If Payload ID is missing from the output device the monitor will process the incoming signal as 4:2:2 YCbCr when set to AUTO, but this update allows the SDI Format Selection override (Video Menu-> SDI Format -> manual selection) to also work on 1.5G and 3G signals, not just 6G and 12G signals.
Sep 23, 2022	2.0.00-2348	DM Series	Significant update to AutoCal for improved perceptual lowlight performance, especially on LCD models. An optional Mesopic Optimization toggle has been added to the Color Management menu. When enabled this mode can improve visual performance below photopic luminance ranges by incorporating an accommodation for mesopic spectral sensitivity functions. Enabling or Disabling the Mesopic Optimization toggle does not require recalibration, as with other Color Management menu selections LUTs will be calculated on an as needed basis from the stored AutoCal profiling data. Bug fix for potential black screen output after AutoCal on some units manufactured after August of 2022.
Sep 22, 2022	2.0.00-2345	DM Series	Significant update to AutoCal for improved perceptual lowlight performance, especially on LCD models. An optional Mesopic Optimization toggle has been added to the Color Management menu. When enabled this mode can improve visual performance below photopic luminance ranges by incorporating an accommodation for mesopic spectral sensitivity functions. Enabling or Disabling the Mesopic Optimization toggle does not require recalibration, as with other Color Management menu selections LUTs will be calculated on an as needed basis from the stored AutoCal profiling data.
Sep 15, 2022	2.0.00-2343	DM241	Significant update to AutoCal for improved perceptual lowlight performance, especially on LCD models. A mesopic optimization has been incorporated in the AutoCal routine for improved visual performance below photopic luminance ranges. To take advantage of this enhanced AutoCal routine please both update your monitor and run a new AutoCal as the previous AutoCal results will continue to be used until a new AutoCal is run. A future firmware release will add the ability to enable or disable this mesopic optimization, the current release is with this optimization enabled only.
Jan 19, 2022	2.0.00-2327	DM241	Reverts default to inter-field selection for I->P mode for DM241.
Jan 6, 2022	2.0.00-2326	AM211P BM211 BM241 BM420 BM550 DM170 DM240 DM241 DM250	Resolves possible ethernet connection bug on some units.
Jan 4, 2022	1.70	BoxIO	Adds stand alone time code capture capability for integration partners. Resolves bug from 1.68 and 1.69 that could cause connectivity issues with older BoxIO devices.
Dec 15, 2021	2.0.00-2325	DM Series	Increases AutoCal patch size on DM170 for improved K10A compatibility. Adds i1d3 to DM250 AutoCal probe selection list.
Oct 19, 2021	1.68	BoxIO	This firmware build can be used on all BoxIO devices. For BoxIO serial numbers greater than B101A02237 this firmware or later is required. Please do not roll back these newer units to firmware before this 1.68 build, it will render your BoxIO inoperable. Adds support for frame callback in 0-1023 Full Range 444 RGB mode.
Jul 19, 2021	2.0.00-2319	DM170 DM240	Adds check / protection for loading incompatible older firmware versions.
Jul 6, 2021	2.0.00-2318	DM170 DM240	Adds AutoCal support for Klein K80.
Jun 23, 2021	2.0.00-2317	AM	Resolves bug that prevented log modes from working correctly when monitor was set to 6500K 2.4 gamma.
Jun 17, 2021	2.1.22	XM	Resolves bug from build 2.1.20 that could prevent USB port from working. Resolves intermittent display of yellow line that could occur when booting XM OLEDs in normal mode.
Jun 7, 2021	2.1.20	XM	Unifies build for all XM models. Saved profile configurations can now be loaded via function button. See user manual for details.
Jun 2, 2021	2.0.00-2314	DM170 DM240	Fixes onscreen prompt typo when selecting CR100 for AutoCal.
Jun 2, 2021	2.1.19	XM	Profile and Profile Set replaced with simpler Profile Save and Profile Load menu options. Default Configuration added providing way to reload factory default settings on monitor. See user manual for details. Preliminary DisplayPort support for testing on XM310K & XM311K only. Not all DisplayPort sources will be supported. For those testing we would greatly appreciate your findings, whether working or not working. When submitting feedback please let us know what OS and Graphics Card you are using. Note: DisplayPort on XM310K is currently only compatible with static backlight selections.
May 19, 2021	2.0.00-2313	DM170 DM240	Adds AutoCal support for X-Rite i1D3 OEM probes (requires probe firmware 2.29c + proper display matrices - contact FSI for details) Adds AutoCal support for Minolta CA410 Adds support for Harris VTM-4100 1024x768 DVI output
Apr 14, 2021	2.0.00-2309	AM211 BM211	Adds Tetrahedral LUT Interpolation.
Mar 15, 2021	2.0.00-2305	DM Series	Adds model number check and firmware mismatch warning. Only becomes active after this update, but for all future firmware updates the monitor will now provide an onscreen warning if you are trying to load a firmware version that does not match with the model number indicated on the system menu. Monitor will now display an “Update Failed. No LUT file found!” error message if trying to load a cLUT with invalid names. Valid names are user1, user2, and user3.
Mar 4, 2021	2.0.00-2303	DM Series	Luminance, RGB Gain/Bias, and other selectable value changes can now be quickly cancelled and returned to previous setting by pressing Menu. To confirm a selection value change press Enter. Resolves intermittent DCI P3 + Gamma 2.6 selection bug.
Feb 23, 2021	2.0.00-2300	DM Series	Resolves custom luminance selection bug on DM250. Set luminance to desired value and press enter to confirm.
Feb 10, 2021	2.0.00-2299	DM Series	AutoCal Calibration now faster (7 to 8 minutes total) as LUTs are now only generated on demand from saved measurement data when a new Gamut, EOTF, CCT combination is used for the first time. This saves considerable time by not calculating and saving LUTs for the wide variety of potential configurations you may not otherwise use. Resolves Fast Mode Bug on DM250 Allows for better calibration optimization to a desired frame rate on DM250 Known Bug (DM250 Only): The Custom Luminance Slider is not working as intended. We are working on a fix for this bug. Custom selections can still be made using this specific workaround: Set Luminance Mode to Custom, Move Luminance slider to desired peak luminance selection, Set Luminance Mode to Standard, then set back to Custom to calculate and activate the new setting. Changing the custom luminance slider and then performing any other action besides that listed above may lock you out of the menu. If this happens simply hold down the power button to reboot the monitor. The Standard, Studio, and Outdoor Luminance selections continue to operate normally and are not impacted by this bug.
Feb 5, 2021	2.0.00-2295	DM250	Updates to Display Port / DVI inputs for improved stability and signal support from various DVI/DP sources. Improvements to luminance control toggles on LCD units when both 3D and 1D LUTs are bypassed. DM250 Known bug: calibration is deactivated in “fast mode.” We are working on a fix for this bug.
Jan 13, 2021	2.1.10	XM Series	Resolves flashing lines bug for 12bit UHD/4K signals sent over 12Gbps or Dual 6Gbps SDI. 12bit signals now supported over 12G and Dual 6G SDI in addition to Quad 3G SDI. Resolves Look/DIT LUT support bug that could cause distorted image and/or line on side of image when look LUT was activated.
Jan 11, 2021	2.0.00-2292	DM Series	Updates to Display Port / DVI inputs for improved stability and signal support from various DVI/DP sources. Improvements to luminance control toggles on LCD units when both 3D and 1D LUTs are bypassed. DM250 Known bug: calibration is deactivated in “fast mode.” We are working on a fix for this bug.
Jan 8, 2021	1.63	BoxIO	Addresses intermittent bug that could cause BoxIO to hang/crash in a very small percent of cases when switching from single to dual channel.
Jan 4, 2021	2.1.9	XM Series	LUT Interpolation now permanently set to tetrahedral. Trilinear removed from menu. Resolves intermittent flashing screen on some XM310K when no signal present.
Jan 4, 2021	1.62	BoxIO	LUT Interpolation now permanently set to tetrahedral. Fix for SMPTE372M Dual-Link SDI Audio Channel bug. Audio channels will now pass correctly on both processed and clean loops. Improved Dual Channel performance, addresses intermittent bugs that would previously manifest in Dual Channel + trilinear mode. This firmware should be used with IPRU build 1.8.6 or later.
Dec 4, 2020	2.0.00-2288	DM Series	Adds AutoCal support for DM Series monitors.
Nov 2, 2020	2.1.8	XM Series	Adds static IP address capability. Resolves potential luminance level bug on XM OLED firmware 2.1.7.
Sep 14, 2020	2.1.7	XM Series	Adds static IP address capability.
May 22, 2020	2.1.3	XM310K XM311K	Fixes bug that may have intermittently prevented processed MON SDI output from working if signal cable was connected before monitor was powered on.
May 11, 2020	2.1.2	XM310K XM311K	Fixes bug that could potentially prevent video from displaying or displaying correctly if monitor booted without signal connected. Other minor bug fixes.
Apr 21, 2020	2.0.01	XM310K	Greatly enhanced support for 3rd party calibration LUTs in Dynamic (modulated backlight) Luminance Modes. Users may now utilize the Dynamic Luminance Mode directly from the USER, LightSpace, and CalMAN Color System selections. Updates to GaiaColor Color System selection, now supports static luminance modes (e.g LUM100) in addition to the previously supported Dynamic Luminance Modes. Vastly improved Peak Mode optimized backlight algorithms for all Color System selections.
Apr 7, 2020	1.88	XM310K	Greatly enhanced support for 3rd party calibration LUTs in Dynamic (modulated backlight) Luminance Modes. User may now utilize the Dynamic Luminance Mode directly from the USER, LightSpace, and CalMAN Color System selections. The Look LUT position no longer needs to be used to support customized calibration LUTs in modulated backlight operation. Auto disable of Back1D LUT position when in Dynamic LUM mode. Auto access/enable of Back1D LUT in Static LUM modes. Auto toggle of NORMAL LUT Mode if Dynamic LUM Mode activated (Dynamic only supported in Normal Mode). When calibration LUTs are set to unity in Dynamic LUM mode within USER, LightSpace, or CalMAN Color System users will have true native color gamut response for profiling. EOTF and peak luminance behavior are governed by baseline EOTF selection calibrated as part of closed loop autocal routine.
Mar 24, 2020	1.85	XM310K	Resolves bug that may have required reselection of EOTF if switching from one gamut option to another with the same primaries while in GaiaColor mode
Mar 20, 2020	1.84	XM310K	Vastly Improved Peak Optimized Modulation Mode Algorithms Ability to assign Modulation Modes to Function Keys. Note, monitor will default to modulation mode set on Video Menu if an alternate modulation mode is not activated via function button Resolved some AWB process bugs Resolved some Function Button response bugs Known Bug, when in GaiaColor Mode static LUM Mode selections (e.g. LUM 100, 200, etc.) may show a full white screen. For static backlight use and to avoid this issue please switch to Default, CalMAN, or LightSpace.
Dec 18, 2019	1.75	XM OLEDs	Resolves bug on XM OLED units that could render monitor inoperable if switching Color System to GaiaColor with certain EOTF selections active.
Dec 3, 2019	1.60	BoxIO	Resolves bug that could cause potential loss of timecode with frame capture when input signal condition changes.
Dec 2, 2019	1.1.74	XM Series	Added 444 RGB signal support to Waveform & Vector Scope Added two additional user configuration memory positions, 5 total now. User configurations now save rotary knob settings.
Dec 2, 2019	1.1.04-2254	DM Series	Maintenance update for select units.
Nov 20, 2019	1.1.04-2253	DM Series	Resolves potential fast mode bug introduced in 1.1.04-2252.
Nov 7, 2019	1.1.04-2252	DM Series	Replaces trilinear LUT interpolation with improved tetrahedral LUT interpolation.
Oct 30, 2019	1.71	XM Series	Fixes Advanced Mode 422 color bug. XM310K - Requires new AWB calibration after update if updating from firmware older than 1.1.69.
Oct 23, 2019	1.70	XM Series	Adjusted resynchronizing behavior with unclean source switching. Monitor will display black until synced to new source. XM310K - Requires new AWB calibration after update if updating from firmware older than 1.1.69.
Oct 18, 2019	1.69	XM310K	Greatly improved HLG performance. Requires new AWB calibration after update. Contact support for additional details.
Aug 19, 2019	1.58	BoxIO	Solves frame capture without timecode bug.
Jul 31, 2019	1.1.04-2251	DM170	Changes I->P default setting to Inter-Field on DM170.
Jul 31, 2019	1.1.04-2250	DM240	Changes I->P default setting to Inter-Field on DM240.
Jul 22, 2019	V1.1.65	XM Series	Support for remote control via IP Remote Utility (Version 1.7.1 for Mac/PC and 3.3 for iOS or newer required) Function buttons now reassignable.
Jul 11, 2019	V1.1.63	XM Series	Markers have been moved to OSD menu. OSD Menu now has “Menu Set” option allowing menu to automatically disappear after 5s, 10s, or to stay On until manually cleared. When you toggle Markers On/Off from Function menu the Marker Menu item reflects the status correctly.
Jul 2, 2019	V1.1.62	XM Series	Allows function buttons to be reassigned.
Jun 10, 2019	V1.1.61	XM Series	Adds Lum Coloring (Customizable Exposure Check) function - BETA
May 23, 2019	1.57	BoxIO	Resolves cold boot without signal bug introduced in firmware 1.56. Resolves dual channel range reporting bug. Requires IPRU 1.6.9 on MacOS and Win or 3.0 on iOS.
May 20, 2019	V1.1.59	XM Series	Fixes bug introduced in 1.1.58 that prevented Clear Panel Noise process from running on XM OLEDs. Fixes bug introduced in 1.1.58 that prevented access to AWB data reset.
May 3, 2019	V1.1.58	XM Series	Adds HDR (PQ) Waveform - BETA (only works with YCbCr formats) - From Scope menu select LUM Style HDR or IRE Updates scopes to allow graticules and traces to automatically match monitor’s current signal range selection (set in Video Menu). Adds Fan Speed Control toggle to System Menu for XM311K. Debugs XM310K 59.94 input signal handling. Addresses irregular vertical jump bug when monitoring interlaced signals. Adds 1:1 Pixel Mapping Option (set in Video Menu).
Apr 15, 2019	1.56	BoxIO	Adds support for Tetrahedral LUT Interpolation. Trilinear LUT Interpolation may still be selected. Requires IPRU 1.6.7 on MacOS and Win or 3.0 on iOS.
Jan 28, 2019	V1.1.54	XM Series	Adds LUT Interpolation selection. Choose from trilinear or tetrahedral. Tetrahedral is recommended. Resolves bug where pressing down on rotary knob if previously set to selection of -50 would not reset knob control to default. Improves functionality of user configuration options and resolves some user configuration bugs. P3-D65-ST2084 renamed to P3-ST2084. On XM310K in GaiaColor mode please note that you must select 6500K as your Color Temperature for a D65 white point when P3-ST2084 gamut is selected.
Jan 8, 2019	V1.1.51	XM Series	Adds ability to save and load user profiles. Changed name of P3-ST 2084 gamut selection to P3-D65-ST 2084. XM310K: Resolves intermittent startup bug (dark rectangle top left in Dynamic backlight mode). OLED Units: Resolves 4K / Quad SDI Bug. Changes name of ColorSpace: User to ColorSpace: Default.
Dec 7, 2018	V1.1.48	XM310K	Adds 12bit display performance when in Dynamic backlight mode.
Dec 7, 2018	V1.1.47	XM310K	Update to Signal ID Window functionality, you can now press the active input button to recall the Signal ID window at any time. CineColor ColorSystem renamed GaiaColor. Updates to EOTF and ColorTemp display when in modes other than GaiaColor, will now always say default in User, LightSpace, and CalMAN modes to avoid confusion. Luminance Mode Default Now set to 100 instead of custom after update. Addresses bug that could cause a momentary bright onscreen flash with transitions from full black to a dark, but visible, scene while in Dynamic Luminance Mode.
Dec 6, 2018	V1.1.48	XM OLED	Addresses bug that used Unity 1D LUT instead of saved Post 1D LUT when switching to LUM HDR mode on XM OLED units.
Nov 28, 2018	V1.1.46	XM310K	Rotary knob positions are now saved through a power cycle. ColorTemp / EOTF selections now locked out in ColorSystems where these selections are not applicable. Factory AWB now password protected. Minor bug fixes to signal ID window operation. Improved support for 720P signal formats. Minor bug fixes to cal sensor access / communication. LUM selections of Dynamic Char and Dynamic Motion Opt consolidated into single selection called Dynamic.
Nov 28, 2018	V1.1.46	XM OLED	Rotary knob positions are now saved through a power cycle. ColorTemp / EOTF selections now locked out in ColorSystems where these selections are not applicable. Factory AWB now password protected. Minor bug fixes to signal ID window operation. Improved support for 720P signal formats. Minor bug fixes to cal sensor access / communication.
Nov 14, 2018	V1.1.44	XM310K	AntiFlicker Selection replaced with Optimize Modulation Selection. Optimize Modulation selections of Peak, Motion, and Contrast added. See manual for details. Luminance Mode and Luminance Custom selections updated. General improvement to LED/LCD sync and backlight modulation algorithms.
Oct 30, 2018	V1.1.42	XM Series	XM310K: Adds Signal Status Display - can be set to On, Off, or 5 second display (default). When set to 5 second display signal status will appear only on format changes or when input button is pressed. See manual for details. Adds Status and Menu positioning options allowing these OSD elements to be moved to different areas of the screen. Resolves Dynamic Character Optimization bug introduced in firmware 1.1.40. Improves AWB performance. Adjusts position of AWB crosshair reference. Adds AntiFlicker selection providing optional levels of flicker/shake reduction in high contrast moving images when in Dynamic Backlight Modes on XM310K. All XM Models: Enables Waveform and VectorScope position toggles.
Oct 29, 2018	V1.1.41	XM OLED	Adds Signal Status Display - can be set to On, Off, or 5 second display (default). When set to 5 second display signal status will appear only on format changes or when input button is pressed. See manual for details. Adds Status and Menu positioning options allowing these OSD elements to be moved to different areas of the screen. Panel dimming setting now remembered through power cycle. Moved HDR panel toggle to Luminance menu.
Sep 24, 2018	V1.1.39	XM Series	Resolves HDR enable bug. Adds two deinterlace options. -Mode 1: Combines fields and displays as progressive. -Mode 2: Shows on screen as interlaced with correct field order. Adds incremental luminance slider in 5nit jumps from 45 to 800.
Sep 20, 2018	V1.1.38	XM Series	Resolves intermittent system boot up bug. Adds Klein K80 / K10A integration.* *XM551U, XM651U, XM650U support K80 and K10A. XM310K does not support the K10A, but does support the K80.
Sep 5, 2018	V0.1.33	XM650U	Improves PsF signal support, PsF now shown as progressive on screen. Adds RGB Gain/Bias controls per color space selection. Resolves bug that made it necessary to reselect color space selection after switching in/out of HDR mode. Adds 3G_DL_IN Video Mode Selection. Adds 6G_DL_IN Video Mode Selection. Adds 6G_DL_IN 3G_OUT Video Mode Selection Adds Payload ID to processed (down converted) monitor output. Adds menu items reserved for future use in CineColor Mode only (not currently active): Temperature, HLG-1200, and HLG-3000. These settings are inactive or bypassed in USER, CalMAN, and LightSpace selections. Changes default LUM setting to 100. SDI Format selection overrides payload ID if not set to AUTO. Adds support for waveform and vector scope with interlaced and PsF sources. Adds TPG handles for third party calibration applications. Adds AWB support for CRI CR100 colorimeter. Calman menu item renamed CalMAN. Gamma menu renamed EOTF. Adds 48nit LUM selection.
Aug 31, 2018	0.1.37	XM310K	PsF signals now automatically shown on screen as progressive. Adds support for waveform and vector scope with interlaced and PsF sources. Adds TPG handles for third party calibration applications. Adds AWB support for CRI CR100 colorimeter. Calman menu item renamed CalMAN. Gamma menu renamed EOTF.
Jun 14, 2018	1.1.04-2249	AM BM CM DM LM	Adds Sundance Marker
Jun 5, 2018	V0.1.24	XM650U	Enables rotary knob control. Enables HD downconversion, use Video -> Mode selection to control. Adds basic interlaced video support, further interlaced video improvements planned. Resolves bug that disabled calibration LUT selection when HDR mode was enabled. Adds HLG-2020 gamut position. Adds Payload ID display to System Menu. Adds Factory AWB menu item -> reserved for future use. Adds support for real time LUT manipulation with on set grading software like LiveGrade Pro.
May 30, 2018	V0.1.54	BoxIO	Enables complete capture of a metadata stream resolving an earlier issue where not all ancillary data packets were retrievable. Required for ancillary data support in LiveGrade Pro Version 4
Apr 20, 2018	V0.1.18	XM650U	Scale to fit support added for 720P, 2K and 4K signals. Improved scaling of 1080p signals. Adds panel dimming control, see user manual for details. Increases peak luminance capabilities in HDR mode by approximately 10% compared to firmware version 0.1.15.
Apr 16, 2018	1.1.04-2248	DM Series	Allows Custom Sharpness to be set while Fast Mode function is active
Apr 4, 2018	1.1.04-2247	DM Series	Allows Max Sharpness and Fast Mode functions to be used simultaneously
Mar 20, 2018	1.1.04-2246	All	Adds 9:16 marker
Jan 25, 2018	1.1.04-2245	All	Adds Discovery V5 marker
Dec 27, 2017	1.1.04-2244	All	Adds 1:1 marker. Resolves bug that could cause monitor to freeze if using Column Scope in Window 2 position.
Oct 12, 2017	1.1.04-2242	All	Adds support for higher frame rate 2048x1080 resolution signals including 47.95P, 48P, 50P, 59.94P, and 60P.
Oct 2, 2017	1.1.04-2238	All	Adds Lifetime V2 & Discovery V3 Markers.
Sep 22, 2017	1.51	BoxIO	Adds ScopeStream functionality Support for new IP Remote Utility 1.0
Sep 6, 2017	1.1.04-2237	All	Moves LUT Update and Profile Load dialogs to top of screen for easier use. Adds Oxygen, Desjardins 1, Desjardins 2 Markers.
Aug 18, 2017	1.1.04-2231	DM Series	Added Real Time Scopes Menu, RTS settings can now be manipulated through menu as well as rotary knobs. Added Customizable Multi-Color Real Time Scope settings. Manage through RTS menu. Fixed bug preventing frame capture from working correctly if ScopeStream was used.
Jul 10, 2017	1.1.04-2223	DM Series	Adds 3rd Generation real-time Focus Assist to DM series monitors with selectable color, intensity, and weight Adds custom marker: Oxygen Adds automated detection and progressive display of PsF signal formats in both standard and fast monitoring modes Adds support for Fast Mode when using 4:4:4 signal formats Resolves DM240 Fast Mode bugs: image moving 1 line lower and flashing white dot in lower left corner of screen
Jun 27, 2017	1.1.04-2207	DM Series	Enables ScopeStream Resolves horizontal bottom line artifact for some patterns and while in fast mode Resolves image/OSD blackout upon startup w/o incoming signal and with monitor still in fast mode Resolves intermittent sparkles when entering fast mode
May 8, 2017	1.1.04-2204	All Monitors	Adds Tele-Quebec Marker Fixes horizontal positioning bug when using fast mode on DM170
Mar 22, 2017	1.1.04-2202	All Monitors	Resolves 5K tone audio output when 19.2K tone input is received.
Mar 22, 2017	1.1.04-2198	DM Series	Adds ability to see active markers underneath translucent and transparent Real Time Scope Modes. Resolves bug that caused corrupt graticules info window readout in certain graticule positions. Resolves missing image line on DM240 with 1080i signals in NR or Show PsF as Progressive modes.
Feb 27, 2017	1.1.04-2194	DM Series	Adds New Advanced Real Time Waveform & Vector Scope
Jan 9, 2017	1.45	BoxIO	Improves Frame Capture Function Frame Captures with "line artifacts" can be resolved by reselecting current active input Updated Range Selections include: Video, Extended, SMPTE Full, and Full Range Adds Dual-Link (SMPTE ST-372M) signal support Updated OSD Menu Overlay
Nov 18, 2016	1.1.03-2185	DM Series	Adds HDR Preview mode to DM Series monitors. See user manual for additional details. Improves backlight dimming performance.
Nov 18, 2016	1.1.03-2181	DM240	Resolves Fast Mode bug for DM240 Adds support for markers while Fast Mode is active
Nov 3, 2016	1.39	BoxIO	Adds support for 2 wire square division 4K.
Oct 24, 2016	1.37	BoxIO	Added ability to apply LUT unscaled in addition to previous capability of applying only within selected operating signal range. Added RAW capture format for BoxIO. Frames saved as RAW may be loaded into Frame Callback feature. Added Frame Callback capability in all modes. A frame previously captured in RAW format may now be played out of BoxIO as a full resolution reference frame. Frames can be quickly loaded from a connected computer and up to 16 frames can be loaded to BoxIO’s onboard flash memory as well. Test patch generation bug for Full Range YCbCr levels resolved, 1:1 correspondence in all signal ranges now. Test patch generation modified to respond to ‘Apply LUT’ selection. Please note that when set to ‘within signal range’ BoxIO will clip output at the limits set by the signal range even if no LUT is active. 10% and 5% windows added as options for TPG output Slight horizontal shift in frame capture resolved Overall frame capture performance improved
Sep 6, 2016	1.31	BoxIO	Fixes Dual Channel Mode relocking glitch after external switching.
Aug 30, 2016	1.30	BoxIO	Enables LUT capability in TPG mode. Adds Frame Capture buffer clear when switching modes in application.
Aug 19, 2016	1.26	BoxIO	Adds Channel 2 Output selection for Mode 2 Channel 1 Input Improves Frame Capture performance Enables clean pass of ancillary data
Aug 16, 2016	1.1.03-2165	Monitors	Adds NBC Safety 2016 Marker DM Series: Enables timecode capture as part of ethernet frame capture protocol. Resolves processed monitor output bug that resulted in vertical line on right side of image with some 3G formats. Resolves intermittent flashing in timecode display for 23.98 and 24P sources.
Aug 16, 2016	1.25	BoxIO	Deprecated, replaced immediately by 1.26 Adds Channel 1 Output selection for Mode 2 Channel 2 Input Improves Frame Capture performance Enables clean pass of ancillary data
Aug 11, 2016	1.24	BoxIO	Improves Frame Capture performance
Aug 8, 2016	1.1.03-2163	DM Series	Enables timecode capture as part of ethernet frame capture protocol. Resolves processed monitor output bug that resulted in vertical line on right side of image with some 3G formats. Resolves intermittent flashing in timecode display for 23.98 and 24P sources.
Aug 4, 2016	1.1.03-2162	AM BM CM	Adds NBC Safety 2016 Marker
Aug 1, 2016	1.23	BoxIO	Adds support for more TPG formats and Window & Full Frame setting.
Jul 11, 2016	1.21	BoxIO	Adds Apply LUT To settings. Adds Test Pattern Generation.
Jun 28, 2016	1.1.03-2153	DM250	Resolves luminance level bug when using P3 & power cycling the monitor.
Jun 16, 2016	0616	BoxIO	Changes hardware names displayed in BoxIO Utility. Changes firmware release version shown in BoxIO Utility.
Jun 14, 2016	0614	BoxIO	Operation of reset button slightly altered to be easier to use, no longer requires a powercycle to reset BoxIO to factory network settings. Adds LED Status light operation (see user manual for more details).
Jun 8, 2016	0608	BoxIO	Resolves minor YCbCr processed out bug.
Jun 3, 2016	0603	BoxIO	Enables network settings reset. Will return settings to those indicated on BoxIO serial # label.
May 24, 2016	1.1.03-2149	DM250	Adds Vertical, Horizontal, and Vertical+Horizontal Image Flip feature for both onscreen and downstream display via second screen SDI output. Set and enable via function key. Toggle between available image flip modes using up/down keys.
Mar 22, 2016	1.1.03-2144	All	All Menus and some menu items rearranged for easier navigation. See updated user manual and/or updated online menu simulators for more details on revised menu order. Added ALL ON Keypad LED option. Allows easier identification of keypad buttons in vary dark operating environments. 1.3mag added as anamorphic desqueeze option. BM/CM DIT LUT now works with 4:4:4 RGB sources. BM/CM/DM PIP function renamed to PAP. PAP/PIP default mode now PAP. Added ability to toggle between PAP, PIP, POP, Vertical Split, and Horizontal Split by using up/down arrow keys while PAP function is active. DM DIT LUT name metadata now shown when LUT activated. DM250: Disembedded audio now in sync in Fast Mode This firmware update will require you to reload any DIT LUTs you are using.
Jan 28, 2016	1.1.02-2013	All	Fixes DSLR Zoom bug.
Jan 27, 2016	1.1.02-2012	All	Luminance mode behavior changed so that you no longer need to exit and reenter the System Menu to have access to the luminance level slider when in CUSTOM mode. Resolves bug from previous release where function button would not illuminate when 3D DIT LUT function was activated. Resolves bug from previous release where DIT LUT would not activate until user pressed up/down key. LUT now activates when function is turned on. Resolves bug that prevented the Show PsF as P bug from working on the BM240. Resolves 720p24 compatibility bug from previous released. General improvements to locking speed and stability.
Jan 7, 2016	1.1.02-2009	All	“Show PsF as” menu selection now only impacts interlaced and PsF signals. This improves usability by ensuring that no processing delay is added to progressive signals regardless of "Show PsF as" setting. Resolved load default profile bug from previous firmware release that did not reset CIE Scope or 3D Disparity functions if active upon profile load. Removed ACES Proxy menu item from AM and LM series monitors as these units do not support ACES Proxy signals.
Jan 4, 2016	1.1.02-2008	All	Adds symmetry grid marker. New Luminance Mode selections: see user manual for details. BM, CM, DM Series Beta release of ACES Proxy (v1.0.0) monitoring modes for field testing. Contact Flanders Scientific for further details. Resolves Audio Loudness feature reset bug introduced in previous firmware. AM Series Resolves active Color Space indication bug. Color space indicated in temporary popup window when pressing input button will now match actual color space selected on Color Management Menu. DM Series Full raster measurement capability added to Video Data feature (same capability as BM and CM series). Automatic Payload ID detection improved for 3Gbps SDI signals.
Sep 24, 2015	1.1.01-2002	DM250	Improved 3Gbps SDI signal stability. Improved Screen Capture integration with LiveGrade Pro. Several improvements to Fast Mode processing speed and quality.
Sep 9, 2015	1.1.01-2001	DM250	Improves 3g signal stability.
Aug 17, 2015	1.1.01-2000	AM BM CM LM	Adds new custom markers: TWC 2015 & Weather Channel 2015 Adds 17:9 marker Resolves intermittent 3Gbps SDI signal display bug Resolves no Audio mute with scope active bug
Aug 7, 2015	1.1.01-1999	DM250	Added support for DIT LUT position loading over USB, previously only calibration LUTs could be loaded via USB on the DM250. Resolved Timecode display bug. Improved scope response speed.
May 26, 2015	1.1.01-1985	ALL LCD Units	Resolves intermittent posterization artifact found in firmware version 1.1.01-1983.
May 26, 2015	1.1.01-1985	BM CM	Resolves Vertical and Horizontal split screen bug.
May 20, 2015	1.1.01-1983	AM BM CM	Adds two new user created markers: History Channel and TWC 2015. Adds new Color Space position titled R709-JM. Any user created calibration LUT may be placed here, but when selecting this color space position the CIE1931/Judd Color Matching selection becomes greyed out on the Color Management Menu. The only functional difference between placing this LUT in the USER1 position vs. R709-JM position is that in the R709-JM position the Color Matching Function menu item is not accessible in order to prevent accidental application of Judd Modified CMF on top of a user generated 3D LUT that already directly targets a Judd Modified CMF white balance. If creating a calibration 3D LUT to load into this position the file name should be titled jm.cfe Adds ability to override factory Rec709 position on OLED units so that operators can load there own calibration LUTs into these positions. This was previously locked out on OLED units with user access only being available on the user1, user2, and user3 positions. Improves signal locking speed when externally switching sources, especially for OLED units. Resolves H/V delay mode bug that showed grey instead of black background in blanking areas when H/V delay feature was activated. (BM & CM only)
Jan 23, 2015	1.1.00-1974	LM Series	Adds custom LIFETIME marker.
Jan 20, 2015	1.1.00-1973	CFE2 Units	Video Data Analyzer feature added. CIE Scope feature added (see manual for feature limitations). 3D Disparity function added for 2 input monitoring. Signals must be same frame rate, resolution, and synced. New 2 inputs PIP modes added: horizontal and vertical split. Can be used with Variable Wipe feature for adjustable split positioning. BT.2020 Emulation added to color space selection menu. Camera Record Tally setting is now retained through power cycle.
Jan 20, 2015	1.1.00-1973	LM Series	Camera Record Tally setting is now retained through power cycle.
Dec 19, 2014	1.0.00-1971	CFE2 Units	CIE Measurement Feature: Select any point on screen to measure and plot its chromaticty values relative to your active color gamut selection. Additionally, you can select a secondary point on screen for comparative analysis of the two points. This comparison includes the ability to quantify the difference as a dE2000 value. Chromaticty can be plotted in either a CIE 1931 or CIE 1976 view. See page 13 of the updated user manual for details on this new feature. Lock Brightness/Chroma/Contrast option added to the System Menu. Turn this ON to prevent accidental adjustment of current settings. The various upload and save CFE/LUT commands have all been consolidated into a single Update LUT command to simplify the LUT loading process. 1D DIT LUT support added. UP to 16 custom 1D DIT LUTs may be uploaded in addition to the 16 3D DIT LUTs already supported. File format uses .lut extension and valid LUT names are dit01.lut through dit16.lut. Support for this 1D LUT format will has already been confirmed for the next official LightSpace CMS release with more programs to follow. Improvements have been made to signal locking speed when switching sources.
Dec 19, 2014	1.0.00-1961	LM CM-170W	CIE Measurement Feature: Select any point on screen to measure and plot its chromaticty values relative to your active color gamut selection. Additionally, you can select a secondary point on screen for comparative analysis of the two points. This comparison includes the ability to quantify the difference as a dE2000 value. Chromaticty can be plotted in either a CIE 1931 or CIE 1976 view. See page 13 of the updated user manual for details on this new feature.
Nov 18, 2014	1.0.00-1965	CFE2 Units	Corrected green screen display when selecting empty input.
Nov 17, 2014	1.0.00-1964	CFE2 Units	PIP SDI ALT feature added. Unclean switch locking/freezing bug resolved. Timecode selection via OSD no longer freezes out other function button selections. Canon camera SD signal support bug resolved. CIE Measurement featured added (BETA only).
Oct 27, 2014	1.0.00-1960	CFE2 Units	3D DIT LUT Feature Update: When the DIT LUT function is active you can now change between loaded 3D DIT LUTs by simply pressing the up and down arrow keys without having to enter the Color Management menu. Brief on screen overlay now identifies active 3D DIT LUT. DVI-D Audio selection added: Channel 1 & 2. This capability only works on units shipped after October 27th, 2014.
Oct 20, 2014	1.0.00-1958	CFE2 Units	Monitors now support storage of up to 16 3D DIT LUTs with revised .datV2 LUT format. - LightSpace and Lattice both now export in this format. DIT LUT is now toggled on/off via assigned function button. - The 3D LUT that is toggled on/off is set on the Color Management menu by selecting the desired channel. 16 Channel Audio Loudness Monitoring has been added. Time Code can now be toggled on/off via Function Button. SDI Black Level Selection allows for easier full range vs. legal range monitor setup. Default gamma is now 2.4 and default luminance menu setting is 29. You may reset to previous defaults (2.2. and 35) by selecting those settings from the menu. Graticules Info On/Off toggle allows line position and span size information to be turned on/off when using the custom graticules marker feature. Fix for frozen screen when Show PsF as P was selected and H/V delay was toggled on. OLED models default Flicker Free On.
Jun 18, 2014	9.54-1951	CM250	Allows for scaling-free application of third party generated 3D calibration LUTs for more accurate calibration of OLED units with third party software. Adds Graticules info on/off toggle. Allows for profiling with flicker free on or off (so no more need to switch to flicker free off). Adds “Outdoor” marker. This is a Platform update that requires reloading the DCIP3.CFE file
May 21, 2014	9.54-1950	All	Adds settings to make graticules area solid or translucent in addition to single lines. Fixes intermittent bug when switching "show psF as" on CM250.
May 15, 2014	9.54-1949	All	Adds Red Only, Green Only, Red Only as Mono, Green Only as Mono, Blue Only as Mono modes. Various user markers added. Fixes Horizontal Audio meter bug present while viewing interlace footage with show psF as P. Adds various user created markers.
Apr 23, 2014	9.53-1947	CFE2 Units	Resolves white point shift bug when using P3 Color Space selection in combination with Flicker Free Mode On selection. Adds ability to reset Audio Loudness meter using RESET(VOLUME) rotary knob.
Mar 20, 2014	9.53-1945	CFE2 Units	Adds audio monitoring support for 3G Level B signals including 12bit / 4:4:4 sources. Adds single channel audio loudness meter. Audio channel selectable from Audio menu. Resolves various 3G Level B viewing mode bugs (Stream selection, checkerboard display, vertical & horizontal split).
Mar 13, 2014	9.53-1944	CFE2 Units	Updated Flicker Free Mode: resolves low level clipping on OLED units operating in Flicker Free Mode On
Feb 28, 2014	9.53-1941	All Models	Adds S-Log3 Full and Standard
Feb 20, 2014	9.53-1938	CFE2 Units*	Adds new markers: 2:1, TWC2014, Discovery V3. Updated color of OSD scrollbar. Fixed an issue with 3G Level B PIP. *CM320TD and CM500TD include updates from 9.53-1937, which was never released for those units.
Feb 3, 2014	9.53-1937	CFE2 Units	New temporary on screen display window when input button is pressed detailing: Signal Resolution and Frame Rate, Active Color Space (Color Management Menu), Gamma Response (Video Menu), Color Matching Function (Color Management Menu). PIP function default now set to Picture and Picture (instead of windowed Picture in Picture), secondary input default now set to SDI 2 instead of CVBS. Adds BETA support for 4K signals over 2 x 3Gbps SDI inputs. Various other stability enhancements.
Dec 27, 2013	9.53-1934	OLED	Adds flicker free mode On/Off toggle to Video Menu for OLED units.
Dec 18, 2013	9.53-1933	ALL	Adds more custom marker selections. Adds Dual Link support for CFE2 Units. Adds 12bit 2K support for 3G.
Nov 25, 2013	9.53-1925	ALL	Adds setting to display PSF as Progressive or Interlaced. Adds Max Sharpness function.
Nov 21, 2013	9.53-1923	ALL	Fixes text overlap in menus. Adds Audio Loudness beta. Support for 12bit XYZ format.
Nov 11, 2013	9.53-1920	ALL	Adds VU meter types: True Peak, PPM1, PPM2 Added Judd CMF for OLED Monitors Resolves Solarization Bug affecting small percentage of CM320TD low frame rate material
Oct 21, 2013	9.53-1907	ALL	Adds updated audio meters with adjustable peak hold. Adds new Udisk mode for easier firmware and LUT update. Adds custom markers: NatGEO and TWC Safety 2013
Sep 5, 2013	9.53-1901	ALL	Adds Hue Vector Scope Improves Interlaced Video Processing Adds new PIP function with corresponding selections in System menu for BM / CM Series.
Aug 31, 2013	9.52-1897	BM Series CM Series	Resolves interlaced video processing bug. Adds support for DIT LUT
Aug 6, 2013	9.52-1894	BM Series CM Series	Adds Hue Vector Scope *Released with MHD version 1.4 for CM320TD Resolves issue that may have distorted display of some illegal video levels Various 3gbps SDI format support improvements
Aug 13, 2013	9.51-1890	LM Series	Adds Hue Vector Scope
Jul 5, 2013	9.51-1884	BM210 BM230 CM171 CM240	Resolves issue where first line of some interlaced sources was not shown correctly. Resolves 4:4:4 YCbCr Level B 3Gbps signal support bug.
Jul 3, 2013	9.51-1883	BM210 BM230 CM171 CM240	Fixed issue where Timecode fails to display. Fixed bug where 1st line of some interlaced sources did not display correctly.
Jun 26, 2013	9.51-1880	BM210 BM230 CM171 CM240	Improves de-interlacing performance in all video processing modes
Jun 24, 2013	9.51-1878	BM210 BM230 CM171 CM240	Improves de-interlacing performance in all video processing modes
May 7, 2013	9.51-1870	ALL	-Adds SLog2 monitoring mode to all units. *NOTE: For units with CFE Boards (CM-170, LM-2461W, LM-2460W, etc.) you MUST first update to 9.50-1866 before updating to 9.51. If you skipped the 9.49-1863 CFE update you will also need to load the full CFE package now available with 9.50-1866 before updating to this firmware version. If you have any questions about this please contact support@flandersscientific.com or +1.678.835.4934
Feb 21, 2013	9.49-1863	ALL	-Recording Status Tally feature now works with SDI signals coming from Canon cameras like the C300. -New Timecode Background option. Allows you to select between solid blue and translucent black background options. This works in both the newer large timecode and traditional smaller timecode view modes. -Audio Phase Indicator has been added as an optional display item in Safety Broadcast Mode. You can activate this via the Alarm Menu. -Several new custom user created markers are now available including 3.125:1, 6.25:1, and Adobe. In addition to the updates above the following updates will apply to the LM-2461W, LM-2460W, and CM-170: -Custom calibration 3D LUT import capabilities have been added. This includes the addition of 3 USER color space positions so that custom calibration LUTs can be loaded without needing to override standard color space selections. Specifically, customers using the latest version of Light Illusion’s LightSpace CMS can already export LUTs in FSI’s 64x64x64 3D LUT format for import to the monitor. See the user manual for more details. -Updated CFE Package has been issued in conjunction with this firmware. This includes an updated code.bin file as well as new Rec709, EBU, and SMPTE C color space files. These new files further refine color accuracy, especially in lowlight tracking, and are based on the latest data collected from new reference instruments. You must load these updated files after updating to 9.49-1863 or later firmware. *old code.bin, Rec709, EBU, SMPTE C files have been replaced by updated files. The old Rec709.dat has been renamed and reolcated to user1.dat.
Nov 19, 2012	9.47-1941	ALL	-Adds Timecode Background Option (choose between solid blue and translucent black) -Adds Audio Phase Alarm to Alarm Menu
Oct 18, 2012	9.47-1837	ALL	-Adds Timecode Size option to OSD menu. Select between standard small mode and the new large mode. *Note: XYZ support continues in beta form in this release. -Adds On-Screen tally option. Activated via function menu and generates an onscreen tally window that mirrors the status of the physical tally.
Sep 27, 2012	9.47-1830	ALL	-Adds fast access to Log monitoring modes via Function button assignment. -Adds Rec. Status Tally indicating via monitor tally light when camera is recording. Designed for use with cameras that output Start/Stop Record Flags in the ancillary data of their serial digital output. Currently supports Sony and ARRI Alexa cameras with SDI start/stop record flag feature enabled. See user manual pg 16 for more details. -Adds 12bit processing and signal support to all monitors with 3Gbps SDI inputs. Payload ID detection is enabled for all RGB and YCbCr signals, whether 10bit or 12bit, but manual selections of 4:4:4 RGB 12bit, 4:4:4 YCbCr 12bit, and 4:2:2 YCbCr 12bit have been added to the SDI Format menu toggle for signals without Payload ID present. -BETA support of XYZ signals has been added to all monitors with 3Gbps SDI inputs. When sending an XYZ signal to the monitor you must manually select 4:4:4 XYZ 12bit from the SDI format setting on the Video Menu. The XYZ signal will be mapped to the color space set on the Display Alignment menu. Some XYZ signals may not be fully supported at this time. Please contact Support@FlandersScientific.com or +1.678.835.4934 for assistance or feedback.
Aug 14, 2012	9.46-1812	ALL	-Adds Log Mode selection to Video menu. Select from OFF (default), C-Log Standard, C-Log Full, S-Log Standard, or S-Log Full. Allows for easier On Set monitoring of uncorrected C-Log or S-Log signals. See the updated PDF user manual for more details. -Removes Film Gamma menu item and replaces it with Gamma Select menu item. This change also removes the UNCORRECTED setting that would simply disable a monitor's calibration.
Jun 25, 2012	9.46-1806	ALL	-Adds Audio Lockout Feature. When Audio Lockout is set to ON from Audio menu the Volume knob will retain the last used setting and cannot be adjusted or muted until Audio Lockout is set back to off.
Jun 5, 2012	9.46-1805	ALL	-2048x1080p25 and 2048x1080psf25 signal support added -Marker color bug resolved. Marker color selection will now be remembered for each individual marker profile -New user created Custom Markers added to Area Marker options
Apr 26, 2012	9.46-1798	ALL	-New OSC viewing mode added for LM-0750W only. Allows any two scopes to be viewed along with an Audio Phase Meter and 2 Channel Audio Level Meter in a quad view with the live video signal. Set OSC mode to On from the Scopes and VU Meters menu to activate this mode. -Added diagnostic viewing modes for 3D signals over 3Gbps Level B SDI including Checkerboard and Disparity Check to all monitor models. The checkerboard mode allows for adjustable checkerboard size via the Checkerboard size option on the System Menu.
Feb 27, 2012	9.45-1779	ALL	-Updated TWC SAFETY Marker, replaces old TWC marker -Added 16by9 in 4by3 marker for HD Signals. Shows a box outlining the 16by9 portion of a 4by3 cutout of an HD video signal.
Jan 17, 2012	9.45-1777	ALL	-RGB and GBR Parade Scopes now feature color coded Red, Green, and Blue Channels. -Still Frame improved to allow for color critical use -Focus Assist feature updated so that feature works over entire image, not just windowed portion of signal.
Jan 8, 2012	9.44-1770	ALL	-Adds ability to adjust volume while Scopes are active, you no longer need to disable onscreen scopes before adjusting volume. -Improves Audio Phase Metering Accuracy
Dec 1, 2011	9.44-1760	ALL	-Adds ability to use markers while CX Scale is active -Some factory default settings changed (activated by loading 'default' profile) to more commonly used function button and scopes and VU meters configurations. -RGB Scope Mode renamed to RGB Parade. GBR Scope Mode renamed to GBR Parade.
Nov 1, 2011	9.43-1754	ALL	-Adds CX Scale Feature on Function Menu. Allows for 1 button access to a custom scaling mode allowing for full screen and centered scaling of serial digital output from Codex ARRIRAW Onboard Recorders -Resolves Intermittent image distortion bug when entering/exiting AFD and/or Anamorphic De-Squeeze functions.
Sep 26, 2011	9.42	ALL	-New Custom Markers:Discovery & WS-SAFE-A-T -New unlockable SDI HUE adjustment option. Found on System Menu, select SDI HUE Adjustment On or Off. When On Hue adjustment knob will become active even on SDI signals. Please note that the default position is correct so HUE should not be adjusted unless you have a specific applicaiton requirng such an adjustment. -Default Scope Intensity level has been changed from 50% of maximum to 75% of maxium intensity. You can still adjust the intensity level using the the H POS rotary knob while your socpe is on screen. -Anamorphic Desqueeze feature added. When activated via a funciton button the monitor will automatically adjust the aspect and/or magnifaciton of your incoming signal by the ratio selected for Anamorphic Desqueeze on the Video menu. Select from 1.3, 2.0, or 2.0mag. -RGB and GBR parades indications have been shifted right to avoid overlap with the IRE level scale on the left of the scope window. -SD Enhancement Selection added to Video Menu, activates max sharpening and image enhancement for SD video signals. -Mono Mode and SD Aspect Ratio removed from Video Menu, still accessible via function button assignment. -AFD Function added providing AFD code and detail readout as well as onscreen marker indications of AFD described areas. -Pixel Position function removed. When activating Pixel Mapping the H POS rotary knob now automatically becomes the Pixel Position Toggle (press down on knob to toggle) therefore freeing up another funciton butotn position for those wishing to use pixel positon in conjunction with pixel mapping.
May 23, 2011	9.41	ALL	-Adds Overlay Mode to 3Gbps Level B viewing mode options. Overlay mode allows for proper viewing of a combined LinkA and LinkB stream (372M format mapping) over the Level B 3Gbps SDI Inputs -Resolves various Level A 3Gbp SDI bugs -Adds TWC-HD1 Custom Marker -Still Frame feature updated to work on high resolution progressive signals -Safety Broadcast featue added to funciton menu. UMD Display, Color, and Position as well as audio meter toggles added to Alarm Menu for Safety Broadcast adjustment -IRE Trigger Level scale changed from Digital Levels to IRE scale
Apr 28, 2011	9.40	ALL	-Adds 3Gbps SDI Level B monitoring options to units equipped with 3Gbps SDI Inputs. Select between monitoring Stream 1, Stream 2, PAP (picture and picture), PIP (picture in Picture), POP (picture on picture, inverse of PIP), Vertical Split, and Horizontal Split. Selection is found on System Menu and labeled 3G Level B. -Bug causing image loss when Overscan was activated while viewing component analog sources has been fixed. -LevelB Variable Wipe Function added. Only for use with Level B 3Gbps SDI signals on 3Gbps SDI equipped monitors, allows adjustment of Split Screen positioning in Horizontal/Vertical Split monitoring modes. -Sub Window bug preventing scopes from working while Sub Window is active has been resolved. -Removes MUTE indication from Audio Level Meters, replaced by NO DATA indication if embedded audio is not present. -Intermittent Vector Scope Gain expansion bug preventing 2x Gain expansion from being selectable has been resolved. -Adds Alarm Menu to monitor with ability to select onscreen alarm triggers. Onscreen Alarms do not require older units to be updated by FSI, this firmware update will enable this ability. Update at FSI's service facility will only be required for remote alarm monitoring via external software. See Manual for Details on Alarm Monitoring capabilities. -Add Source ID window to list of available Scope Windows. Source ID window is capable of showing manual Source ID, Remotely programmed UMD, and Tally Light status. -Adds DSLR Zoom function allowing for full screen scaling of 1080 and 480 DSLR outputs. See User Manual for details on DSLR Zoom feature. -Additional Permitted Max Level Added to Audio Level Meters: -10dBFS -Still Frame feature added. Allows user to freeze any frame of video with a function button, please note that this is limited to a max resolution of 1920x1080 and cannot be used in conjunction with other functions. -LUM Coloring feature updated. Middle range now adjustable in addition to max/min range. Middle Range will show as greyscale by default, but can be adjusted by using rotary knobs. See User Manual for details. -Graticules (Custom Marker) function has been updated to include a Span Width readout showing size (in pixels) of the box created by the graticules feature. -Ability to view just channels 1 & 2 added to audio level meters to allow for minimal overlap of active video in Horizontal Audio Level Meters mode compared to monitoring 8 or 16 channels of audio.
Feb 2, 2011	9.38	ALL	-Adds 3 New Scopes: YCbCr Overlay, RGB Overlay, and Audio Phase Meter -Previous Flesh Tone Line on Vector Scope has been replaced by i-line axis. -Adds 3 Marker Profiles allowing for instant switching between three user configured Marker Layouts using designated Function Buttons -Updates Audio Level Meters with more detailed Scales -Updates Audio Level Meters with new feature that will show a MUTE indication in any Audio Channel that has no audible volume, but is part of an embedded Group of Audio. If nothing is shown (No audio level and not MUTE indication) then the Group of Audio associated with that channel is not embedded into the SDI signal. -EBU/SMPTE Audio Selection replaced by Alignment Level Selection -Adjustable Permitted Max Level Added to Audio Level Meter Settings
Nov 18, 2010	9.37	ALL	-Adds Scopes & VU Meters Profiles, Blue Only, Crosshatch, H/V Delay, Overscan, and LUM Coloring to GPI menu options -Resolves bug preventing scopes from being used on some monitors while Sub Window mode is active. -Updates Sub Window Mode. Image now frozen/unfrozen using H POS rotary knob. Ability to switch to second input of same resolution after image is frozen on first input. -Resolves 8bit Measurement Feature bug showing bogus value if Luminance Value in Diff row was negative.
Sep 30, 2010	9.36	ALL	-Adds Stackable Scopes Toggle. From the Scopes & VU Meters Menu use the Scopes Stack option to select whether your two scope windows are placed horizontally next to each other or are vertically stacked on top of one another -8bit measurment mode modified so that absolute RGB values show 1:1 correspondence with incoming signal. Measurment Mode will now allow for percentage values above 100%. -Vector Scope Gain Adjustment added. Select between 1x, 2x, or 4x Gain by turning the V POS Rotary knob while Vector Scope is turned on. -Focus Assist Window may now be moved to different parts of the screen faster. -More detail added to Vector Scope with addition of IRE lines and skin tone line -YCbCr and RGB Histogram Scope Modes added -RGB order added as option for parade waveform. You may now select whether to view parade waveform in RGB or GBR configuration. -Pixel Zoom Feature added. When turned on you can use the H POS and V POS rotary knobs to select any area on screen to zoom into. You can use the REF POS rotary knob to change the size of the Pixel Zoom rectangle. Pressing down on the Ref POS rotary knob while Pixel Zoom is on activates the zoomed mode. See user manual version 2.3 or later for more details on this feature. -10bit Measurement Mode added in addition to 8bit Measurement Mode. Measurement mode now allows you to move in 1 pixel increments. Measurment mode will also allow you to change the sample size from a block of hundreds of pixels to just a single pixel by turning the REF POS rotary knob. See user manual 2.3 or later for more details on this feature. -Timecode Position option. You can now move the timecode window to any of 6 onscreen locations.
Jul 28, 2010	9.35	ALL	-Adds SD Aspect Toggle to Function Menu -Updates to Marker Graticules Function to indicate proper postioning notification on screen. -Addition of Full Screen Function. Allows you to stretch any source to fill the screen. Unlike the Zoom Function the Full Screen Function does not preserve the native aspect ratio of the source, but does keep all of the active video visible. This function is most useful when used with some rasterizters that allow for a widescreen 1024x768 DVI signal. The Full Screen function allows such sources to be seen on screen as intended. -Adds Histogram and Color Histogram features to the Scopes Function. -Audio Sync Setting added to Audio Menu. Allows you to select between signal clock or internal clock. This toggle can improve audio disembedding quality depending on the source in use. If you experience any audio disembedding distorition try changing this setting to improve quality. -Lum Coloring Feature's scale will now follow the Waveform Scale set in the the Scopes and VU Meters Profile 1. Lum Coloring Feature has also been updated to represent overexposed areas in white and underexposed areas in black.
May 20, 2010	9.30	ALL	-Adds ability to view any two Scopes Modes onscreen at the same time. Please note that if two Scopes Modes are displayed at the same time they will update more slowly than if using just one Scopes Mode at a time. -Adds Focus Assist feature. Reference 'in focus' level is adjustable with rotary knob. -Adds GPI Keylock feature allowing keypad (all buttons except for power button) to be locked out via GPI remote control. -Adds Custom Graticules feature allowing user to set 4 lines anywhere on screen to create a custom marker. Line positioning is controlled with rotary knobs when function is activated. -Adds Line/Sample difference values to Measurement function. -Adds ability to view any two Scopes Modes onscreen at the same time. Please note that if two Scopes Modes are displayed at the same time they will update more slowly than if using just one Scopes Mode at a time. -Adds Focus Assist feature. Reference 'in focus' level is adjustable with rotary knob. -Adds GPI Keylock feature allowing keypad (all buttons except for power button) to be locked out via GPI remote control. -Adds Custom Graticules feature allowing user to set 4 lines anywhere on screen to create a custom marker. Line positioning is controlled with rotary knobs when function is activated. -Adds Line/Sample difference values to Measurement function. -Adds ability to view any two Scopes Modes onscreen at the same time. Please note that if two Scopes Modes are displayed at the same time they will update more slowly than if using just one Scopes Mode at a time. -Adds Focus Assist feature. Reference 'in focus' level is adjustable with rotary knob. -Adds GPI Keylock feature allowing keypad (all buttons except for power button) to be locked out via GPI remote control. -Adds Custom Graticules feature allowing user to set 4 lines anywhere on screen to create a custom marker. Line positioning is controlled with rotary knobs when function is activated. -Adds Line/Sample difference values to Measurement function. -Adds ability to view any two Scopes Modes onscreen at the same time. Please note that if two Scopes Modes are displayed at the same time they will update more slowly than if using just one Scopes Mode at a time. -Adds Focus Assist feature. Reference 'in focus' level is adjustable with rotary knob. -Adds GPI Keylock feature allowing keypad (all buttons except for power button) to be locked out via GPI remote control. -Adds Custom Graticules feature allowing user to set 4 lines anywhere on screen to create a custom marker. Line positioning is controlled with rotary knobs when function is activated. -Adds Line/Sample difference values to Measurement function. -Adds ability to view any two Scopes Modes onscreen at the same time. Please note that if two Scopes Modes are displayed at the same time they will update more slowly than if using just one Scopes Mode at a time. -Adds Focus Assist feature. Reference 'in focus' level is adjustable with rotary knob. -Adds GPI Keylock feature allowing keypad (all buttons except for power button) to be locked out via GPI remote control. -Adds Custom Graticules feature allowing user to set 4 lines anywhere on screen to create a custom marker. Line positioning is controlled with rotary knobs when function is activated. -Adds Line/Sample difference values to Measurement function. -Adds ability to view any two Scopes Modes onscreen at the same time. Please note that if two Scopes Modes are displayed at the same time they will update more slowly than if using just one Scopes Mode at a time. -Adds Focus Assist feature. Reference 'in focus' level is adjustable with rotary knob. -Adds GPI Keylock feature allowing keypad (all buttons except for power button) to be locked out via GPI remote control. -Adds Custom Graticules feature allowing user to set 4 lines anywhere on screen to create a custom marker. Line positioning is controlled with rotary knobs when function is activated. -Adds Line/Sample difference values to Measurement function. Resolves vBit Bug issue causing some NTSC sources to be positioned to low on screen (leading to bottom portion of video not being shown) depending on vBit line position. This release will resolve this problem and keep active video centered on screen regardless of vBit positioning. Adds password protection step to reset factory alignment function.
Mar 18, 2010	9.26	ALL	-Replaces current 4 level sharpness setting with sharpness level slider offering 30 different levels to choose from. -Improves Accuracy of Waveform indications and onscreen display of levels with component video signals
Jan 10, 2010	9.23	ALL	-LUM Coloring feature added. See user manual for details. -Resolves firmware version 9.21 LM-2450W flickering marker bug
Dec 7, 2009	9.21	ALL	-Optimized LUTs added for LM-2450W allowing for more accurate replication of available color space selections. These optimized LUTs also include the gamma accuracy optimization, first added in version 8.14, that were accidentially left out of version 9.20 firmware. -Audio Disembedding bug from 9.20 that may have caused distortion in audio channels 3 through 16 with some formats is resolved in 9.21 -Please note that starting in version 9.21 two versions of firmware will exist for the LM-2450W models. To select the correct version to upload check your version in the System Status Menu and match to the appropriate firmware version.
Oct 29, 2009	9.20	ALL	-RGB Gain and Offset Adjustments added to display alignment menu. If you would like to tweak the RGB settings please do so by using these settings. You do not need to press the Reset Factory Alignment Menu to operate the RGB Gain and Offset functions and we DO NOT recommend that you Reset to Factory Alignment unless specifically asked to do so by an FSI support representative. Similarly, please do not operate the Start Display Alignment Function unless you are in possession of an FSI automatic alignment kit. -Reset Factory Alignment bug resolved. In firmware version 9.16 selecting the Reset Factory Alignment option from the Display Alignment Menu could cause the monitor's screen to become inoperable until updated. This update resolves this bug and can be used to renable the monitor if this bug was encounterd by user in 9.16.
Sep 30, 2009	9.16	ALL	-Three Scopes & VU Meters Profiles added. Each Scopes & VU Meters profile can be assigned to an individual Function button for instantaneous switching between Waveform, Vector Sope, and VU Meter modes -Video Clipping function modified so that the correct default Chroma value regardless of Video Clipping status is 0. If you have Video Clipping Off and Chroma value currently set to -17, please reset your Chroma value to 0. -Measurment function added. Once assigned to a function button can be used to measure YRGB levels of any spot on screen by using H Pos and V Pos rotary knobs to highlight area to be measured. Pressing the F.D. (Find Delta) rotary knob allows you to establish a reference position and compare to any other onscreen positon. Pressing the contrast knob while Measurment function is active allows you to establish an F-Stop reference value and compare differences between onscreen positions as an F-Stop Value. Pressing the Volume knob while Measurment function is enabled resets/clears this F-Stop information from the screen. -Drop Frame Timecode bug resolved. Earlier firmware versions may not have shown frame counts correctly when drop frame timecode was being used. This issue is resolved in 9.16. -Measurment function crosshairs will follow color of markers -Safety in Area function added to Marker menu. With this function set to ON your safety area will be shown realitive to your desired area marker (ie 4:3). With this function set to OFF your Safety Area will be shown relative to the incoming source. -Lum Coloring Feature added to Menu, but not yet active. This feature will be added in future releases. -After installing this update all future updates may be installed with either the traditional upload program (32 Bit Windows Systems Only) or via a new mass storage firmware update path. You must install 9.16 or later firmware with the traditional update program BEFORE this mass storage firmware update method will work. Once installed future updates may be loaded with any computer supporting USB mass storage devices. To activate USB mass storage update mode the following key sequence should be pressed while the monitor is plugged in, but the power is left off (Red power LED not lit): MENU, ENTER, UP, DOWN, MENU, ENTER, UP, DOWN, MENU, DOWN, POWER. Then simply drag and drop the new firmware to the root directory of the monitor (monitor will show up as USB mass storage device on computer). Once the firmware has been successfully copied to the monitor (mass storage device) the Update Firmware menu item on the Display Alignment Menu will become active (no longer greyed out), simply select this feature to complete the update of your monitor. -Toggle Backlight function added to GPI menu. This is a power saving function that toggles between your default backlight setting and the minimum (but still on) backlight setting.
Aug 5, 2009	9.13	ALL	-Component Setup Feature Added (Select from YPbPr SMPTE/N10, YPbPr Betacam, and YPbPr MII) -Vbit bug resolved that may have caused sync loss on some SD-SDI sources with Vbit on line 10 when using 9.06-9.11 firmware -2.4:1 Marker Added -Video Clipping default setting changed to OFF -Alignment Safety step added with 'are you sure' step after 'start display alignment' selection -Color Temp, Marker Color, etc. now actively reset when loading default or user profiles -'NTSC Setup' renamed 'Composite Setup' & composite setup bug causing clipping of sub black levels in analog composite resolved.
Aug 5, 2009	9.12	Only Ships on New Units	-Component Setup Feature Added (Select from YPbPr SMPTE/N10, YPbPr Betacam, and YPbPr MII) -Vbit bug resolved that may have caused sync loss on some SD-SDI sources with Vbit on line 10 when using 9.06-9.11 firmware -2.4:1 Marker Added -Video Clipping default setting changed to OFF -Alignment Safety step added with 'are you sure' step after 'start display alignment' selection -Color Temp, Marker Color, etc. now actively reset when loading default or user profiles -'NTSC Setup' renamed 'Composite Setup' & composite setup bug causing clipping of sub black levels in analog composite resolved.
Jul 17, 2009	9.11	DO NOT REPLACE 9.10 WITH 9.11	-Adds System Menu Notification of unit as 3G if 3G board is installed -Changes default NTSC setup to 7.5, not 0 as in firmware 0.9.08/0.9.09 -3 User Profiles added for Waveform / Vector Scope Function, which allow all Scopes and VU Meters preferences to be saved into 1 of 3 selectable profiles -Resolves NTSC setup bug that caused user selected NTSC setup option to be lost when switching to/from composite input -Solves potential compatibility issue with SD-SDI output from some Digibeta decks
Jul 17, 2009	9.10	Only Ships on New Units	-Adds System Menu Notification of unit as 3G if 3G board is installed -Changes default NTSC setup to 7.5, not 0 as in firmware 0.9.08/0.9.09 -3 User Profiles added for Waveform / Vector Scope Function, which allow all Scopes and VU Meters preferences to be saved into 1 of 3 selectable profiles -Resolves NTSC setup bug that caused user selected NTSC setup option to be lost when switching to/from composite input -Solves potential compatibility issue with SD-SDI output from some Digibeta decks
Jan 9, 2009	9.09	9.06	DO NOT REPLACE 9.08 WITH 9.09 - Adds clipping function in "Display Alignment" menu -Adds 1080p 25/30Hz support for DVI-D input -Adds 1920x1200 60hz support for LM2450W (may require EDID update to monitor for certain graphics cards) -Adds NTSC setup setting in "Video" menu -Adds SDI Format selection in "Video" menu
Jul 9, 2009	9.08	Only Ships on New Units	- Adds clipping function in "Display Alignment" menu -Adds 1080p 25/30Hz support for DVI-D input -Adds EBU 2.35 gamma -Adds 1920x1200 60hz support for LM2450W -Adds NTSC setup setting in "Video" menu -Adds SDI Format selection in "Video" menu -Adds 5000K Color Temperature Selection
Jun 29, 2009	9.06	ALL	-Adds Timecode Feature (LTC, VITC 1, VITC 2) -Analog YPbPr vs RGB Toggle added -DVI Format Selection (YPbPr, Full RGB, Limited RGB) -Waveform Position feature added -H/V Delay Feature added -Push Button Audio Mute added -3G Status ID labeling if Signal is 3G added -AutoSync between 4:4:4 RGB and 4:4:4 YPbPr added -Adds support for 720p24/25/30 -NTSC Setup (0 or 7.5 IRE) added -Active Boundary Marker feature added
Jun 12, 2009	0.8.22	8.16	Improves Synchronization with 1080 sources and provides more accurate distinction between possible 1080 framerates. Resolves Potential Sync Loss Issue.
May 7, 2009	0.8.16	All	Disembedded audio now in sync for all signals / processing modes Same Gamma fix as 0.8.14
May 1, 2009	0.8.14	None	Gamma Accuracy improved
Apr 28, 2009	0.8.13	ALL	HW w/o Audio Fix Only - H/V Delay added in menu but not operational yet Audio disembedding on SD fixed
Apr 28, 2009	0.8.12	ALL	HW w Audio Fix Only - H/V Delay added in menu but not operational yet Audio disembedding on SD fixed
Apr 28, 2009	0.8.11	ALL	HW w/o Audio Fix Only - DVI-D Pixel Format Selection (Full RGB, Limited RGB and YCbCR) - Reduced switching delay - Support for DVI 1280x768@60, 1366x768@60, 1440x900@60- DVI-D Pixel Format Selection (Full RGB, Limited RGB and YCbCR) - Reduced switching delay - Support for DVI 1280x768@60, 1366x768@60, 1440x900@60 - Fix for Audio disembedding on fractional HD formats
Apr 28, 2009	8.10	ALL	HW w Audio Fix Only - DVI-D Pixel Format Selection (Full RGB, Limited RGB and YCbCR) - Reduced switching delay - Support for DVI 1280x768@60, 1366x768@60, 1440x900@60- DVI-D Pixel Format Selection (Full RGB, Limited RGB and YCbCR) - Reduced switching delay - Support for DVI 1280x768@60, 1366x768@60, 1440x900@60 - Fix for Audio disembedding on fractional HD formats
Apr 19, 2009	8.07	None	FSI Default settings Audio disembedding on 25 and 50 signals impoved, but all others not.
Apr 19, 2009	8.06	None	FSI Default settings Audio disembedding on 25 and 50 signals improved
Apr 18, 2009	8.05	ALL	HW w Audio Fix Only
Apr 10, 2009	8.04	0.7.07 (LM-2450 only)	0.8.03 fixes + 3DLUT for Rec 709 and EBU Sparkles in Video Field Reversal 24psf Noise Reduction
Apr 10, 2009	8.03	0.7.07 and 0.7.08 (ALL except LM-2450)	Blue Only Remains when changing Brithness setting etc LED's OFF turns off both Power and Input LED
Apr 7, 2009	8.01	24" only	FSI Internal Use Only
Apr 6, 2009	8.00	none	FSI Internal Use Only (Audio Test)
Apr 1, 2009	7.09	24" only	FSI Internal Use Only (3D LUT test)
Mar 24, 2009	7.08	17" only	- Gamma correction 17"
Mar 23, 2009	7.07	0.7.06	- Attempted Fix for Audio Issue partly solved (crackling noise eliminated but stil distortion of the embedded audio (clicking noise) -Partial Color Temp Improvement
Mar 22, 2009	7.06	0.7.04	Marker 15:9 - New Menu sructure; Function - Scopes & VU-Meters - Video - Audio - Marker - System - OSD - GPI - Display Alignment - System Status - Support - Staus overview (Zoom, Blue, Marker, Overscan, Subwindow, Pixel Mapping, Pixel Position, Mono Mode, Scopes & VU-Meters, Crosshatch, Processing - Alignment procedure offers option to skip the 30min waiting time, total alignment time now 20minutes - Sharpness level setting "Medium" renamed to "Default"- Alignment procedure offers option to skip the 30min waiting time, total alignment time now 20minutes - Sharpness level setting "Medium" renamed to "Default"
Mar 17, 2009	7.04	0.7.00	- Audio Level Meters: Selection Channels 1-8, 9-16 or 1-16 - WFM Digital Level Values 0 and 255 - WFM Digital Level now also available for RGB and Column WFM displays- Audio Level Meters: Selection Channels 1-8, 9-16 or 1-16 - WFM Digital Level Values 0 and 255 - WFM Digital Level now also available for RGB and Column WFM displays - LM-2450W Strobing effect on 1080i23.98psF - Crosshatch in Pixel to Pixel Mode - Markers in Pixel to Pixel Mode (but in center pos only) - "Overscan" instead of "Over Scan" In OSD text - Live update of function status in OSD/System Status Page- LM-2450W Strobing effect on 1080i23.98psF - Crosshatch in Pixel to Pixel Mode - Markers in Pixel to Pixel Mode (but in center pos only) - "Overscan" instead of "Over Scan" In OSD text - Live update of function status in OSD/System Status Page
Mar 18, 2009	7.02	none	FSI Internal Use Only

Firmware

DM Series

Current AutoCal Compatible Firmware

Pre-AutoCal Firmware

Current AutoCal Compatible Firmware

Pre-AutoCal Firmware

Current AutoCal Compatible Firmware

Pre-AutoCal Firmware

DM Series Beta

XMP Series

XMP C Series

BoxIO

AM Series

BM Series

CM Series

XM Series

LM Series

CM-170W

Easy To Update

Classic Update Method